Forum Discussion
Justkennie_4820
Nimbostratus
NimbostratusF5 LTM not synchronising with NTP Server
Hi All,
Pleae help out, my LTM is not synchronising with my NTP server.
My NTP server is 10.10.10.10, with gateway of 10.10.10.1 on cisco FWSM
My LTM have a management IP of 20.20.20.2...
Justkennie_4820Nimbostratus
Nimbostratus
[root@ACC-GTM-01:Active] config tcpdump udp port 123
tcpdump: WARNING: eth0: no IPv4 address assigned
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0, link-type EN10MB (Ethernet), capture size 108 bytes
16:37:30.201229 IP ACC-GTM-01.ABC.COM.ntp > 10.2.104.19.ntp: NTPv4, Client, length 48
16:37:30.203031 IP 10.2.104.19.ntp > ACC-GTM-01.ABC.COM.ntp: NTPv3, Server, length 48
16:38:05.202147 IP ACC-GTM-01.ABC.COM.ntp > 10.2.104.47.ntp: NTPv4, Client, length 48
16:38:05.202738 IP 10.2.104.47.ntp > ACC-GTM-01.ABC.COM.ntp: NTPv3, Server, length 48
[root@ACC-GTM-01:Active] config ntpq -np
remote refid st t when poll reach delay offset jitter
==============================================================================
10.2.104.47 .LOCL. 1 u 46 64 377 0.596 -117951 9.868
10.2.104.19 10.2.104.10 3 u 15 64 377 0.523 -117953 19.465