F5 GTM DNS Pools and Wide IP's not syncing

Device sync is different that GTM sync. Have you gone through the GTM synchronization process? It will require the use of gtm_add. Check this out, https://support.f5.com/kb/en-us/products/big-ip_gtm/manuals/product/gtm-implementations-11-5-0/3.html

Hi Brad Thanks for the response. I have followed the procedure but the gtm_add keeps failing. It succeeded once but did not copy the GSLB objects across

I get the following error although I ping the address and telnet to the port 4353. I can also see the GTM's communicating when i do a tcpdump

Enter the IP address of a remote GTM BIG-IP from which you want to copy the configuration: 10.75.22.4 ==> Running 'bigstart shutdown gtmd' on the local system ==> Running 'bigstart shutdown zrd' on the local system ==> Running 'bigstart shutdown named' on the local system Retrieving remote and installing local BIG-IP's SSL certs ... Enter root password if prompted Password: Rekeying Master Key... Saving running configuration... /config/bigip.conf /config/bigip_base.conf /config/bigip_user.conf Verifying iQuery connection to 10.75.22.4. This may take up to 30 seconds iQuery connection to 10.75.22.4 failed. Is big3d running? Is tcp port 4353 access allowed?

Restarting gtmd Restarting named Restarting zrd root@(GTM-1)(cfg-sync In Sync)(gtmd DOWN)(/Common)(tmos)

Hi Brad ignore my last comment it was an expired cert that was making it fail. Renewed and was successful. Thanks for your help