Forum Discussion
cpt_ri_F5
Cirrostratus
CirrostratusF5 Connection Mirroring question
Hello, show sys connection type mirror This command should show the mirror connections on the Stanby? LTM BIG-IP Thank you
Hello,
No, the connections are not mirrored !
To share in case it might help someone someday: I had a TG conf problem, the VS was configured in the TG1 and nexthop (floating self-ip) in the TG2, I configured everything in TG1, and it works.
Thank you Mohamed_Ahmed_Kansoh M_Saeed
cpt_ri_F5Cirrostratus
CirrostratusHelo Mohamed_Ahmed_Kansoh Thank you for your help,
I use both HA links which works correctly, status, syn conf, failover...
Active:
sys state-mirroring {
addr 10.0.1.10 >>> vlan: HA
secondary-addr 10.0.2.10 >>> vlan: HA_BAK
Standby:
sys state-mirroring {
addr 10.0.1.20 >>> vlan: HA
secondary-addr 10.0.2.20 >>> vlan: HA_BAK
I have already executed K54622241, nothing special except no traffic for tcpdump
Thank you.
HI cpt_ri_F5 ,
Interesting !
Is it a back to back HA Connectivity ?
I mean both devices are directily connected or there is FW between them ?
I believe there is no ACKs for mirroring connections.
