Forum Discussion
randms26_178300
Nimbostratus
NimbostratusF5 BIG-IP LTM pool no outbound traffic
Hello, I am trying to setup a new virtual server (port 80) on F5 BIG-IP. I can ping the VIP and all its member IP. I can ping to the self IP of the F5 from the member server. Service is http and it's running normaly when I'm accessing the server directly, but it gave me a blank page if I access it using the VIP.
When I check the pool statistics, it shows bits & packet IN but no bits & packets OUT. I am totally new into this BIG-IP thing, can someone please guide me as clear as possible of what I should do to get this working?
Thanks in advance :)
nitassEmployee
can you post the virtual server and pool configuration?
tmsh list ltm virtual (name) tmsh list ltm pool (name
randms26_178300I added it on my post.. btw it's from the GUI setting. what else do you need?
- nitass_89166
Noctilucent
can you post the virtual server and pool configuration?
tmsh list ltm virtual (name) tmsh list ltm pool (name- randms26_178300I added it on my post.. btw it's from the GUI setting. what else do you need?
- randms26_178300virtual server configuration: type : host ip : 10.2.3.4 service port : 80 state : enabled configuration is all basic load balancing default persistence profile source_addr pool load balancing method : least connection (node) priority group : disabled member : 10.2.3.2:80 & 10.2.3.3:80 all members are all set up in ratio and prior group 1
- nitass
can you try snat automap under virtual server setting?
- randms26_178300cant really understand what you mean, can you be more specific in step by step? i actually dont really understand the basic F5 operation..thanks...
- nitassin virtual server properties, configure source address translation to automap.
Sasi2k20_322209The above solution worked
in virtual server properties, configure source address translation to automap.
thanks nitass
- nitass_89166
can you try snat automap under virtual server setting?
- randms26_178300cant really understand what you mean, can you be more specific in step by step? i actually dont really understand the basic F5 operation..thanks...
- nitass_89166in virtual server properties, configure source address translation to automap.
- Sasi2k20_322209
The above solution worked
in virtual server properties, configure source address translation to automap.
thanks nitass
- curioman
It helped me. Thanks a lot.
- randms26_178300
dear all,
thank you for your effort to help, but I managed to solve it. I dont know why but creating another self IP in same VLAN and check the floating IP options is what makes the magic possible :) I thought floating IP is used for failover between 2 BIG-IP (in my place we only use 1 BIG-IP), can someone explain about this?