Ex2010, default GW, routing

Ok i got it by my self :-)

If anyone has the same problem, here is my resolution:

1. Create an new Pool on LTM

1.1 Add IP address of GW-router for your subnet

1.2 Under advanced pool settings, set "Allow SNAT" to "No" (optional, select icmp health monitor)

2. Create new fastL4 profile (Local Traffic - Virtual Servers - Profiles - Protocol - fastL4)

2.1 In the profile, check "Loose Initiation" and "Loose Close"

2. Create new Virtual Server

2.1 Set type to "Performance L4"

2.2 Set destination to 0.0.0.0 / 0.0.0.0

2.3 Set service Port to "*All Ports"

2.4 Expand "Advanced" configuration

2.5 Set Protocol to "*All Protocols"

2.6. Set Protocol Profile (Client) to your newly created fastL4 profile (with loose init,close)

2.7 Uncheck "Address Translation" and "Port Translation"

3. Set default GW of HUB-Server to LTM floating-IP

Thats it...