Forum Discussion
beejung_111535
Nimbostratus
NimbostratusError between install
The problem begin when i use .ucs from F5 v9.4.5 to upload on F5 v9.2.2.76.6. After upload finished and reboot, i cannot login to the F5 LTM any more.(it show login prompt on command line but cannot login) so i try to reset password but it shown as cannot connect to mcp server. So I try to install new software on this LTM 6400 again with the same version (9.2.2.76.6) by using PXE method to CF Card and it shown the error between transfer
Results will be sent to install log /var/log/install.log.
Restarting syslogd for status logging
install.info: Start installation...
install.info: Creating RAM disk for RPM files...
install.info: ====Transferring====
install.info: package set: LTM.ROS.dat
install.info: repository: http://10.1.10.199/cdserver
install.info: name: BIG-IP
install.info: version: 9.2.2
install.info: transfer product: http://10.1.10.199/cdserver/BIGIP922 to /mnt/tmp/install/ram/BIGIP922
install.info: 23 of 267 packages transferred...
install.info: 55 of 267 packages transferred...
install.info: 78 of 267 packages transferred...
install.info: 103 of 267 packages transferred...
install.info: 126 of 267 packages transferred...
install.info: 138 of 267 packages transferred...
install.info: 166 of 267 packages transferred...
install.info: 193 of 267 packages transferred...
install.info: 215 of 267 packages transferred...
install.info: 237 of 267 packages transferred...
install.error: Integrity check for i386/hsibj-eud-1.0-9.2.2.76.6.i386.rpm failed: status is 1
install.error: An installation error has occurred; code 1
bash-2.05b
so i try to in stall again with PXE mode on HD1.1, CDRom mode on CF Card and HD1.1 mode, install PXE mode and CDRom Mode with other software version(9.2.2.5, 9.4.6.401.0,9.4.7)and also do (SOL6346: Recovering from a corrupt drive partition) but it still the same. I still found error between packages transfer (- -")
info: Start installation...
info: Creating RAM disk for RPM files...
info: ====Transferring====
info: package set: LTM.ROS.dat
info: repository: http://10.1.10.199/cdserver
info: name: BIG-IP
info: version: 9.4.6
info: transfer product description
info: transfer product packages
info: 9 of 324 packages transferred...
info: 30 of 324 packages transferred...
info: 62 of 324 packages transferred...
info: 86 of 324 packages transferred...
info: 112 of 324 packages transferred...
info: 140 of 324 packages transferred...
info: 150 of 324 packages transferred...
info: 175 of 324 packages transferred...
info: 199 of 324 packages transferred...
info: 229 of 324 packages transferred...
info: 244 of 324 packages transferred...
error: Integrity check for i686/gtm-1.1-9.4.6.401.0.i686.rpm failed: status is 1
error: An installation error has occurred; code 1
bash-3.00
What should i do (- -") Pls help me. Thank you in advanced
- The_BhattmanI had received the EXACT same error about 6 months ago. I recommend performing an EUD Diagnostic and capturing the results and opening a case with F5. In my case it turned out to be a failure on a hardware controller that manages the internal storage of the LTM - which resulted in an RMA.
Hope this helps
CB 
beejung_111535Thanks for you suggestion :D
If i m not do rma, may i do something else :D- The_BhattmanI think F5 support might have several different options that you can try such as a low level format, but I believe they know the exact commands.
CB - beejung_111535thanks for your suggestion
- beejung_111535I already do EUD Test, all passed !! But it still not able to install (see attached)
What should i do next?
(This F5 LTM MA already expire so it cannot do RMA) - The_BhattmanDid you try to install it on the HD partitions? What about using USB installation?
- beejung_111535Yes, i already try to install with CDRom on HDD but it still not work. However, my friend have tried with v9.1 as the same step and it already work ^^. Still dont know why but problem has been solved. Thank you for your kindly help.
- The_BhattmanCould have been a bad ISO?
