Forum Discussion
Oleksandr_Malof
Altocumulus
AltocumulusDSC is not coming up for LTM VEs after initial setup
Hi everyone.
It looks like I am facing an issue described here: https://devcentral.f5.com/questions/devices-are-not-synchronizing-configuration-to-each-other-59604. The point is that I was trying to...
The answer to my initial question - yes, it is possible to configure DSC with VE v13, at least, using LAB license. But this requires 8 GB of RAM and 4 CPUs per VE. Not sure if this can be performed with Trial or Evaluation licenses as I have no possibility to test this.
Oleksandr_MalofAltocumulus
AltocumulusThe answer to my initial question - yes, it is possible to configure DSC with VE v13, at least, using LAB license. But this requires 8 GB of RAM and 4 CPUs per VE. Not sure if this can be performed with Trial or Evaluation licenses as I have no possibility to test this.
Hey Oleksandr
So you solved the problem by simply increasing the RAM and CPU count? Or did you move from your laptop to the ESXi environment?
I have ran HA environments on even less than 4gb per BIG-IP and it has worked flawlessly. As I mentioned before, the only time the HA would not work is when I used an evaluation license. As soon as I used a 45 day license or a bought VE Lab license, it worked perfectly.