Forum Discussion
Bill_Chipman_10
Nimbostratus
NimbostratusDoes anyone have 11.6 LTM doing IPsec with 3rd party device
We are trying to create ipSec tunnel with 3 traffic selectors on one IKE peer. The tunnel will come up, however we aren't able to get any traffic flowing over the link. Traceroute shows that the conn...
my experience with big ip for ipsec, it doesn't work properly i tried a lot with link controller to terminate and to by pass ipsec traffic nothing works, many technical cases with no progress
Mahmoud_Eldeeb_
Cirrostratus
Cirrostratusmy experience with big ip for ipsec, it doesn't work properly i tried a lot with link controller to terminate and to by pass ipsec traffic nothing works, many technical cases with no progress
Bill_Chipman_10thanks, That is what I expected. There aren't any other questions about ipsec for the past three months. I suspect everyone else has given up on this as well. Sigh. Used to work, I guess it broke in version 11.- Mahmoud_Eldeeb_Don't forget to mark the answer as the solution if you would, please.
- Bill_Chipman_10I'll leave it out there for a day or so in case someone has gotten this to work.
Leonardo_Accor1I have configured Ipsec with a Palo Alto firewall and work fine. I don't remember very well all steps I have done so I have now reviewed the configuration. I see that I have done an IP Forward VS, in order to rotate the trafic trough the network segments. I suggest you to try and see if the routing flow correctly.
regards
Leonardo