Forum Discussion

Brian_Gibson_30's avatar
Brian_Gibson_30
Icon for Nimbostratus rankNimbostratus
Feb 17, 2015

Creating a dynamic one-to-one SNAT pool

We have a problem with an SMB VIP that appears to be NAT related. What we are looking to do is create a SNAT pool in which each new IP address is assigned it's own SNAT address.   Is there any ...
application delivery
devops
irules
LTM
Brad_Parker_139's avatar
Brad_Parker_139
Icon for Nacreous rankNacreous
Feb 17, 2015

You will most likely need to use an iRule. Are you looking to map a /24 to a /24 or something similar? If so, you could write an iRule that can SNAT 10.0.0.x to 192.168.0.x, for example, by just translating the last digit of the address.

 

Brian_Gibson_30's avatar
Brian_Gibson_30
Icon for Nimbostratus rankNimbostratus
Feb 17, 2015
It isn't that bad a problem but it is a problem. This is an internal service so the number of users is limited to a few hundred. We will just glom a 10./8 address block and use that. What is being alleged is that the LB NAT of the connections is making the server drop connections. If you want a more detailed explanation it is based on this writeup... http://www.nynaeve.net/?p=93 We aren't 100% certain that this is the problem but we did see several writeups similar to this one and they all describe the problem we see.