Configuring F5 BIG IP LTM for SNMP

Thanks Jason, nitass and Hamish..

 

 

@jason.. i have tried adding the OID as .1.3.6.1.4.1.3375.2 and the LTM accepted it. but when i tried to run a snmpwalk from the clients added to the LTM (Under Client Allow List),i was not getting any response. But at the same time when i tried snmpwalk with the default community "public" which is already in F5, i was getting the reply. It was quite strange that LTM was not accepting the new community and the OID.

 

 

@nitass... The version that i am using is 9.4.7 and it doesn accept to add the community without an OID. What i have done is i have openned the MIB's using a MIB browser and noted down all the OID's. Then i have identified the parent OID among them and added that to F5. LTM accepted the configuration but the snmpwalk didnt worked.

 

 

@Hamish..I havent tried the OID with .1 but i suspect it also doesnt work on my version 9.4.7.