For more information regarding the security incident at F5, the actions we are taking to address it, and our ongoing efforts to protect our customers, click here.

Forum Discussion

computerli's avatar
computerli
Icon for Altostratus rankAltostratus
Aug 07, 2018

ConfigSync on virtual F5

I need help configuring the Configsync   I initially had two virtual F5s running trial 90 day License. I purchased the Lab licenses and installed on the virtual F5s. The license is configured and...
application delivery
LTM
ShiranCohen_325's avatar
ShiranCohen_325
Icon for Cirrus rankCirrus
Aug 08, 2018

Hi,

I have noticed that on "BIGIP-F5-2.w2k16.com" you have "Mirroring IP 192.168.93.102" which not exist on "BIGIP-F5-1.w2k16.com", so first i would suggest to disable the mirroring on the device and configure Specific "Connection Mirroring" Per VS. OR, setup the primary mirroring ip "BIGIP-F5-1.w2k16.com" Self IP on both units in the Traffic group & secondary mirroring ip on both units. run this command to see the status of the HA mirror status - tmsh show sys ha-mirror. it should look like this :

On Active Device

Sys::HA Mirror Status

Traffic Group      TMM    Primary  Secondary  Aborts  Overflows  Errors  Buffered  L4 Mirror  L7 Mirror  L7 Failed

traffic-group-1  [0.0]  connected     closed       1          0       0         0          0          104          64

traffic-group-1  [0.1]  connected     closed       1          0       0         0          0          106          58

On Standby Device:

Sys::HA Mirror Status

Traffic Group      TMM    Primary  Secondary  Aborts  Overflows  Errors  Buffered  L4 Mirror  L7 Mirror  L7 Failed

traffic-group-1  [0.0]  connected     closed       1          0       2         0          0          40          0

traffic-group-1  [0.1]  connected     closed       1          0       2         0          0          50          0

Hope it helped, Shiran.

Shiran_Cohen's avatar
Shiran_Cohen
Icon for Nimbostratus rankNimbostratus
Aug 14, 2018

Hi DTN, I'm glad it's working now but i have a lot of customers with any 13 versions & all of them are syncing. so, there is some mismatch between version specifically on your devices. Maybe some irule with "()" this kind of Braces ? Just to be sure try to "tmsh load sys config verify" to see errors / warnings. Have a nice upgrade - it should work.

 

Best Regards, Shiran Cohen.