Forum Discussion
AltostratusConfigSync on virtual F5
CirrusHi,
I have noticed that on "BIGIP-F5-2.w2k16.com" you have "Mirroring IP 192.168.93.102" which not exist on "BIGIP-F5-1.w2k16.com", so first i would suggest to disable the mirroring on the device and configure Specific "Connection Mirroring" Per VS. OR, setup the primary mirroring ip "BIGIP-F5-1.w2k16.com" Self IP on both units in the Traffic group & secondary mirroring ip on both units. run this command to see the status of the HA mirror status - tmsh show sys ha-mirror. it should look like this :
On Active Device
Sys::HA Mirror Status
Traffic Group TMM Primary Secondary Aborts Overflows Errors Buffered L4 Mirror L7 Mirror L7 Failed
traffic-group-1 [0.0] connected closed 1 0 0 0 0 104 64
traffic-group-1 [0.1] connected closed 1 0 0 0 0 106 58
On Standby Device:
Sys::HA Mirror Status
Traffic Group TMM Primary Secondary Aborts Overflows Errors Buffered L4 Mirror L7 Mirror L7 Failed
traffic-group-1 [0.0] connected closed 1 0 2 0 0 40 0
traffic-group-1 [0.1] connected closed 1 0 2 0 0 50 0
Hope it helped, Shiran.
AltostratusThanks everyone for trying to help.
The issue is not related to configuration, but the Version 13.x
Refer to https://devcentral.f5.com/questions/devices-are-not-synchronizing-configuration-to-each-other-59604
I stared off with Version BIGIP-13.1.0.2-0.0.6, which did not work.
Next I upgraded to BIGIP-13.1.1-0.0.4, which also did not work.
Finally I downgraded to BIGIP-12.1.3.6-0.0.3, which worked.
