Forum Discussion
RiverFish
Altostratus
AltostratusClone traffic sent on port 0, need actual port
I tried the clone pool feature within the VIP settings but there's no traffic being sent to the clone server (not layer 2 adjacent). The iRule below works but the traffic is sent to the clone pool on...
RiverFishAltostratus
AltostratusS, yes it does work if I specify a port for the HSL pool but then I’d have to create 13 vips, 13 irules and 13 HSL pools, one for each port. Was hoping to avoid this.
Simon_Blakely
Employee
EmployeeYou can't - on an HSL pool, the pool port specifies the port used to send the logging traffic.
It's a different mechanism to a wildcard pool where the port is passed through to the pool member.
You can still use a single VIP and irule, but you will need 13 HSL pools and some decision logic or a datagroup lookup.
Or don't use a HSL pool and use a sideband connection
Advanced iRules: Sideband Connections
