F5 is upgrading its customer support chat feature on My.F5.com. Chat support will be unavailable from 6am-10am PST on 1/20/26. Refer to K000159584 for details.

Forum Discussion

TammyM_173209's avatar
TammyM_173209
Icon for Nimbostratus rankNimbostratus
Oct 30, 2014

Client IPs

Using BIGIP LTM VE 11.4.1 - My old load balancer showed the client ips connected for each member of the pool. Is there a way to find out this info?  
application delivery
LTM
shaggy's avatar
shaggy
Icon for Nimbostratus rankNimbostratus
Oct 30, 2014

to see current connections from command line:

tmsh show /sys connection ss-server-addr (server-IP)

You can search the connection table using any of the following parameters:

  age             Specifies the age, in seconds, of a connection
  cs-client-addr  Specifies the clientside remote address of the active connections
  cs-client-port  Specifies the clientside remote port of the active connections
  cs-server-addr  Specifies the clientside local address of the active connections
  cs-server-port  Specifies the clientside local port of the active connections
  protocol        Specifies the protocol used for specified connections (for example: tcp, udp)
  ss-client-addr  Specifies the serverside local address of the active connections
  ss-client-port  Specifies the serverside local port of the active connections
  ss-server-addr  Specifies the serverside remote address of the active connections
  ss-server-port  Specifies the serverside remote port of the active connections
  type            Specifies the connnection type used for specified connections (for example: any, mirror, self)