Citrix 6.0 problem in accessin via LTM Ver11.1.0

Posted By Techgeeeg on 01/24/2012 10:48 AM

 

Hi Michael,

 

Good to see your reply let me answer you one by one,

 

 

1. For my first point I am talking about the deployment guide available at the link http://www.f5.com/pdf/deployment-guides/citrix-xenapp-iapp-dg.pdf and I am particularly talking about the changes asked to be done on page no. 10 of this deployment guide so i hope this point must be clear to you.

 

 

Right - so you should've pointed your Web Interface to go through the new VIP for XML broker - that's the only main change necessary.

 

 

2. For point no. two non of the ports are blocked as it is a plan LAN so the servers can be accessed directly there is nothing sitting in the middle blocking any thing.

 

 

Sorry, upon further investigation, it appears that there is a bug - there should be a UDP monitor instead of TCP one - this will be addressed in the updated version of the iApp.

 

 

3. The web and XML broker servers when accessed directly are working perfectly fine. So the issue is there on F5 box that is for sure .

 

 

Please go and remove Compression, Caching, and NTLM/OneConnect profiles from the XML broker virtual if they are assigned and try again, please.

 

 

I have done like almost all the possible combination of tests to make sure if the problem is on the Citrix setup but no it is not the problem pop ups only when coming via LTM....

 

 

The same setup was working fine on version 10.2.2 but it has issues on version 11.1.0

 

 

Kindly let me know if you can help me out in this matter....

 

 

Regards,