Citrix 6.0 problem in accessin via LTM Ver11.1.0

Hi Michael,

 

Good to see your reply let me answer you one by one,

 

 

1. For my first point I am talking about the deployment guide available at the link http://www.f5.com/pdf/deployment-guides/citrix-xenapp-iapp-dg.pdf and I am particularly talking about the changes asked to be done on page no. 10 of this deployment guide so i hope this point must be clear to you.

 

 

2. For point no. two non of the ports are blocked as it is a plan LAN so the servers can be accessed directly there is nothing sitting in the middle blocking any thing.

 

 

3. The web and XML broker servers when accessed directly are working perfectly fine. So the issue is there on F5 box that is for sure

 

 

I have done like almost all the possible combination of tests to make sure if the problem is on the Citrix setup but no it is not the problem pop ups only when coming via LTM....

 

 

The same setup was working fine on version 10.2.2 but it has issues on version 11.1.0

 

 

Kindly let me know if you can help me out in this matter....

 

 

Regards,