Forum Discussion
NimbostratusBIG IP LTM Teredo Traffic
Hi there,
i´m trying to set up a Direct Access environment, using an internal and external LTM, just like shown in the F5 Deployment Guide. Problem is IP-HTTPS is running without any problems, but teredo is not working as is should be. The client isn´t connecting, just reports the primary server cannot be reached via UDP. The firewall is def not an issue, I triple checked this an my standalone test server is working fine. I configured the external LTM as shown inside the deployment guide.
Any ideas whre to look next?
Many thanks
Rgds
Christian
7 Replies
Christian_RaschNobody?
What_Lies_Bene1Cirrostratus
Is the client connecting from 'outside'? Can you describe your setup (esp around the Vitual Servers) in a bit more detail please?
- Christian_Rasch
Yes, the client is located outside.
- Christian_Rasch
Iphttps works fine. Teredo works like a charm without LB. I used the F5 Deployment Guide to set up the external LB, created two Teredo Pools, One IpHttps Pool and two Virtual Server.
- Christian_Rasch
"netsh int ter sh st" shows State:Probe and Primary Server is not reachable via UDP.
- Christian_Rasch
I triple checked my firewall
- Christian_Rasch
Sorry for the posting like that, received a spam warning message
