Auto UCS Backup using SolarWinds NCM

It looks like you'll be in an expert (bash) shell while executing this command. If so you could use the methods below

Method 1 - from F5 to host

Use scp from the box to a remote server, this way you'll push it from the F5 towards your NCM server, but that one does need to have SSH enabled (on the NCM server). You can do it like this: 

scp /var/local/ucs/${SysName}_${Date}.ucs <remote host>:/destination/folder/${SysName}_${Date}.ucs

Method 2 - from host pull from F5

Add a second job on the NCS server to connect using SCP to download the file from the F5. The command will than look like:

scp ${F5-HostName}:/var/local/ucs/${SysName}_${Date}.ucs /local/folder/${SysName}_${Date}.ucs

Both methods assume that ${SysName} and ${Date} are variables that are set by NCM, same goes for the ${F5-HostName} I added in the second command. You might need to fix this to match the true command from NCM. But I don't have SolarWinds NCM available to check this exact behavior. 

Just trying to give you some pointers on what you can do from the F5 side of things.