Forum Discussion
NimbostratusASM Attack Signature Updates via MGMT Interfaces
Hi everyone! I need to setup the Attack Signature updates through the management interface. If i try to get the updates via the TMM interface works fine, but after create a static route to get them via mgmt interface it shows the message "Could not reach the update server. Error: No response from update server".
Here is the static route that i created:
sys management-route update_asm { gateway 192.168.0.254 network 104.219.105.0/24
Am i missing something? Your feedback will be highly appreciated!!!
2 Replies
samstepCirrocumulus
Are you sure the firewall is open and DNS is configured?
Make sure you have checked your configuration against solution SOL8217:
https://support.f5.com/kb/en-us/solutions/public/8000/200/sol8217.html
Also you need to have a route anf firewall rules for all F5 Hosted IPs needed for ASM Attack Signature Updates, which are listed here:
https://support.f5.com/kb/en-us/solutions/public/15000/200/sol15202.html
To validate that it is working try to ping callhome.f5.com first and the curl -kv https://callhome.f5.com from the CLI
Hope this helps,
Sam
Sebastian_Agui1Altostratus
Also, can i use a HTTP proxy instead an HTTPS?
