Forum Discussion
NimbostratusAnyConnect SSL VPN with CAC (SmartCard)
Looking for a "How to" guide to build out an F5 solution for AnyConnect SSL VPN using CAC (SmartCard authentication). Failback development would utilize Cisco ASA. For reference on the type of work being to be completed on a Cisco appliance, please see link below. Any assistnace is greatly appreciated, as an F5 solution would be prefered.
5 Replies
- Kevin_Stewart
Employee
Are you asking about an F5 APM SSL VPN solution using CAC?
william_fisher_Yes, Sir. The current F5 product onsite is a BIG-IP LTM (with APM module). I apologize for not mentioning that the APM would be utilized. I assumed that was understood.
- Kevin_Stewart
Start with a guide to APM Network Access:
https://support.f5.com/kb/en-us/products/big-ip_apm/manuals/product/apm-network-access-11-6-0.html
Then information about the Edge Client (analogous to Cisco's AnyConnect SSL VPN client):
And specific information about Edge client on different client operating systems can be found at the bottom of the main documentation page.
https://support.f5.com/kb/en-us/products/big-ip_apm/versions.11-6-0.html
I'm listing documentation for 11.6, but similar docs can be found for other versions.
- william_fisher_
Awesome. We are running 11.6, so this helps greatly.
Thanks again.
IRONMANCirrostratus
it was worked , thanks
