Forum Discussion

ringoseagull_77's avatar
ringoseagull_77
Icon for Nimbostratus rankNimbostratus
Jul 20, 2010

Active/Standby upgrade - interface question

In SOl1125 there is a requirement to isolate the two F5s during upgrade to maintain service. The document states that you should remove all of the cables from the device you are about to upgrade (exce...
config
design
ringoseagull_77's avatar
ringoseagull_77
Icon for Nimbostratus rankNimbostratus
Jul 20, 2010
Aaron, from my understanding of the interface configuration I believe the physical TMM ports on the F5s are used both for F5 failover and as the ports to the trunked VLANS, so that wouldn't be possible if I wanted to retain service during upgrade.

 

 

I could disable the ports on the switch the standby unit being upgraded physically connects to though.