Websites do not load correctly when load balancing via proxy
We currently have a pair of BIG-IPs with 11.5 running in our DC. One of the services we want to load balance is a pair of Cisco WSAs (IronPort) which function as web proxies. When a client connects via the BIG-IP's VIP to access the Proxies we have the problem that not all of the content is loaded. This problem does not change if we take one of the WSAs out of the pool so that we can be sure we always go via the same proxy. It is also working fine when the clients go via one of the proxies directly. [UPDATE] The http-WSA-proxy profile is based obn the fastL4 but has XFF enabled. Does anyone have an idea what we are missing and why we are not receiving the complete page? High level traffic flow: Client <> BIG-IP Cluster <> Firewall <> 2x Cisco WSA Web Proxy <> Firewall <> Internet LTM config: ltm virtual vs_NAME { destination VIP%RD:webcache ip-protocol tcp mask 255.255.255.255 partition NAME persist { source_addr_mirror { default yes } } pool NAME profiles { /Common/fastL4 { } http-WSA-proxy { } } source 0.0.0.0/0 source-address-translation { type automap } vlans { NAME-VIPs } vlans-enabled vs-index 17 }Implementing SSL Orchestrator - Explicit Proxy Service Configuration (Cisco WSA)
Introduction This article is part of a series on implementing BIG-IP SSL Orchestrator. It includes high availability and central management with BIG-IQ. Implementing SSL/TLS Decryption is not a trivial task. There are many factors to keep in mind and account for, from the network topology and insertion point, to SSL/TLS keyrings, certificates, ciphersuites and on and on. This article focuses on configuring a 3rd party, Explicit Proxy security device and everything you need to know about it. This article covers the configuration of Cisco Web Security Appliance (WSA) running version 11.8. Please forgive me for using SSL and TLS interchangeably in this article. A common Cisco WSA deployment mode is as an Explicit Proxy.The WSA proxy is completely transparent to the user but the BIG-IP will connect to it as an Explicit Proxy. The default settings for Cisco WSA will work with SSL Orchestrator.Keep in mind that: 1)By default WSA accepts connections on ports 80 & 3128.If you changed this you will have to specify the correct port when configuring SSLO. 2)It is assumed you are using WSA security features like URL categorization, Anti-Malware, Reputation filtering, etc. 3)It is recommended to use separate ethernet ports for Management and Data, similar to the image below. Summary In this article you learned how to configure a Cisco WSA in Explicit Proxy mode. Configuration of Cisco WSA can be downloaded fromherein GitLab. Next Steps Click Next to proceed to the next article in the series. Contact Cisco if you need additional assistance with their products.
