version
2 TopicsLTM - check if config was loaded from wrong HD partition during upgrade
Hello, we've had an issue recently where BIG-IP seemed to lose a part of configuration during an upgrade. Having worked a while with LTM I'm very suspicious that "install configuration" feature was used and wrong partition was selected. I've found a couple of logs that seem to confirm this already, with message ID 01420012:5: Loading schema version: 12.1.2 #version in 'spare' unused partition, not active 01420012:5: Loading schema version:14.1.4 #target version These two messages are logged at the same time, and doing some quick googling I believe the first one should reflect the partition config was installed from. Sadly I was not able to find details on event 01420012 in log messages reference (link) nor by googling into public KBs. Can someone confirm this actually is some good evidence for my suspect? Any help will be appreciated.429Views0likes2CommentsProblems upgrading LTM 11.2.1 to 11.5.1
Hello, We are upgrading F5 from 11.2.1 to 11.5.1 version. All is Ok except some issues. First, I don't have any performance statistic. It shows "No records to display." message. The other problem is that in my device group (we have two F5, active-standby), if I see the devices in the avtive one, the avtive is in the right version (11.5.1), but the standby shows de old version (11.2.1), however, both have the same 11.5.1 version. Do you know why it happends? Thank you very much. Regards.217Views0likes1Comment