v10.2.2
1 Topic
Looking for Feedback on Configuring Network Mirroring/Failover for LTM v10.2.2
I have a pair of 3600s that are connected via serial cable and also have a directly connected network connection. Below is the current status of each of the High Availability features and what they use. My goal is to get everything going over the network. I used the article below as a reference and was just looking for some confirmation/feedback. Any reason to leave the serial cable in place or should I go this route? SOL 11736 Device 1 MGMT. 192.168.10.15 Device 2 MGMT. 192.168.10.16 Device 1 Direct Network Connection - 10.0.0.1 Device 2 Direct Network Connection - 10.0.0.2 Current -Configsync Device 1 Peer - 10.0.0.2 Device 2 Peer - 10.0.0.1 -Network Mirroring (Self-Peer; Primary Addr, Alternate Addr) Device 1 - N/A, N/A Device 2 - N/A, N/A -Network Failover Device 1 Peer Address - N/A Device 2 Peer Address - N/A Proposed -Configsync Device 1 Peer - 10.0.0.2 Device 2 Peer - 10.0.0.1 -Network Mirroring (Self-Peer; Primary Addr, Alternate Addr) Device 1 - 10.0.0.1-10.0.0.2, 192.168.10.15-192.168.10.16 Device 2 - 10.0.0.2-10.0.0.1, 192.168.10.16-192.168.10.15 -Network Failover Device 1 Peer Address - 192.168.10.16 Device 2 Peer Address - 192.168.10.15Solved438Views0likes8Comments