F5 LTM 11.3.0(3144) - Syslog remote server problems
Hi all, this problem I'm having is doing my head in! I only want to receive 'crit' to 'emerg' alerts for the cron syslog alert type, yet I am still seeing 'Info' on my remote syslog server! For the record I have followed these 3 articles: http://support.f5.com/kb/en-us/solutions/public/13000/000/sol13080.html http://support.f5.com/kb/en-us/solutions/public/13000/300/sol13317.html http://support.f5.com/kb/en-us/solutions/public/13000/300/sol13333.html Here's my config: [root@myf5:Active:Standalone] config tmsh list /sys syslog all-properties sys syslog { auth-priv-from notice auth-priv-to emerg console-log enabled cron-from crit cron-to emerg daemon-from warning daemon-to emerg description none include none iso-date disabled kern-from warning kern-to emerg local6-from crit local6-to emerg mail-from err mail-to emerg messages-from err messages-to crit remote-servers { zenoss { description none host 10.140.31.6 local-ip 192.168.1.2 remote-port 514 } } user-log-from crit user-log-to emerg } This all looks perfect to me, so I don't understand why I'm seeing these Informational cron alerts. An example alert still coming through is: (syscheck) CMD (/usr/bin/system_check -q) What am I doing wrong? Any help would be hugely appreciated as it's so frustrating. Thanks
11.3 tmsh cli for irule
I have the following irule, and I need to get it into one tmsh cli (using the editor or the gui is not an option). I can enter it through the gui just fine. But when I prepend tmsh create on the front, I can't come up with a sequence which works. Any advice? ltm rule /Common/SNAT2VIP { when CLIENT_ACCEPTED { set VirtualIP [clientside {IP::local_addr}] snat $VirtualIP } } tmsh create ltm rule /Common/SNAT2VIP when CLIENT_ACCEPTED { set VirtualIP [clientside {IP::local_addr}] snat $VirtualIP }} Syntax Error: can't parse TCL script beginning with when CLIENT_ACCEPTED { set VirtualIP [clientside {IP::local_addr}] snat }} [root@sgkdhlbxxxx003:Active] config
Configuration time wrong after hotfix upgrade
Hi, We are running a pair of 4200 series on 11.3, and have recently upgraded to HF6. Since the upgrade, I've noticed that the "Configuration time" always defaults to PST (GMT -8). We're in GMT +0 (the timezone on the device is set to Europe/London) so this is pretty confusing. The log files (ie /var/log/ltm) have the correct timestamp, as do the time/date reading at the top of the configuration page, on the dashboard etc. To make matters even weirder, I've compared this with our F5s at our test site - these are 2900s running the exact same software levels (11.3, HF6), and the timestamp always displays in the correct timezone. Any ideas?