Help required on : SNMPv2 allowed address configuration
Hi Team , We have a compliance issue and have to match the SNMPv2 configuration exactly as below ...what is the CLI command to match the exact below configuration ? allowed-addresses { (127.0.0.0\/255.0.0.0 |182.64.10.0\/255.255.255.0 |182.80.10.0\/255.255.255.0 |182.88.10.0\/255.255.255.0 |186.34.16.0\/255.255.255.0 |186.18.16.0\/255.255.255.0 ){6}} Will the below command can fix the issue ? not sure what does {6} means ! modify sys snmp allowed-addresses replace-all-with { 127.0.0.0/255.0.0.0 182.64.10.0/255.255.255.0 182.80.10.0/255.255.255.0 182.88.10.0/255.255.255.0 186.34.16.0/255.255.255.0 186.18.16.0/255.255.255.0 }
64 bit counter on BIG-IP 3900
Hello, I have a F5 device that my SNMP monitoring tool is failing to pick up the line speed on (BIG-IP 390011.6.0, 6.0.442 Hotfix HF6). The ports are set to 1 gig (the monitoring tool shows no data). After looking at a SNMP walk of the device there is no data available for the 64 bit counter (the 32 bit counter for speeds below 1 gig is fine), so there's no oid for the tool to poll. Has anyone else seen an issue like this on the hotfix listed above? Thanks