Configure SNAT Pool custom SNMP MIB
Hello community, I'm trying to monitor how many connections are in my SNAT pool to control that connection limits are not exceeded. My NMS is Zabbix. In my scenario, I get "Current Connections" for each SNAT Pool using next snmp query: snmpwalk -v2c -c public localhost F5-BIGIP-LOCAL-MIB::ltmSnatPoolStatServerCurConns F5-BIGIP-LOCAL-MIB::ltmSnatPoolStatServerCurConns."/Common/SNAT_test" = Gauge32: 513 F5-BIGIP-LOCAL-MIB::ltmSnatPoolStatServerCurConns."/Common/SNAT_pub" = Gauge32: 21444 After this, I would like to trigger an alert (in Zabbix) when those Current Connections exceed 80% of the SNAT Pool capacity (to include a new IP in the pool in that case). We estimate the SNAT Pool capacity in 65k connections for each IP in the pool. A query with next structure would be perfect to set this trigger: snmpwalk -v2c -c public localhost F5-BIGIP-LOCAL-MIB::XXXXXXXXXXXXXXXX F5-BIGIP-LOCAL-MIB::XXXXXXXXXXXXXXXX."/Common/SNAT_test" = INTEGER: 2 F5-BIGIP-LOCAL-MIB::XXXXXXXXXXXXXXXX."/Common/SNAT_pub" = INTEGER: 7 (Note that the result should show how many IPs are configured in each pool). I didn't find anything like this in MIB, so I decided to create a custom MIB, but just a few of structures are available (INT, STRING, GAUGE, and COUNTER), and Lists are not included. So I guess this is not possible using this way... 😞 Any idea to solve this? (create "custom_mib.tcl" dynamically with a crontab is not an option). I have tried if lists of strings are permited using next code: /config/snmp/custom_mib.tcl register_mib ".2" testmib string proc testmib {} { set result [split "Hello world" " "] return $result } But after SNMP query, no string splitting was performed: snmpwalk -v2c -c public localhost F5-BIGIP-COMMON-MIB::bigipTrafficMgmt.100.2 F5-BIGIP-COMMON-MIB::bigipTrafficMgmt.100.2.0 = STRING: "Hello World" KR, Dario.Install Mibs in order
Hello, I have a managment software (IMC) from Helwett Packard Enterprise, I need to install the mibs from F5 BIG-IP into the managment software IMC but I do not know, what is the order instalation from the mibs, I understand the mibs have dependency one to one . The part from memory monitor, I can not to watch in the software managment only CPU. regards Guillermo
MIB and/or OID of dashboard graph of throughput
Not having any luck finding the MIB for the throughput graph shown in the dashboard. I have all mibs downloaded and a snmpwalk of the host, but cannot find anything relevant that matches up. Can someone please point me in the right direction? BIG-IP VPR-C2400 11.4.1 Build 608.0 Final Closest previous post I could find here: https://devcentral.f5.com/questions/help-finding-oid-for-gtm-performance-graph
