healthcheck

2 Topics

about create wide ip,
i create generic host (Firewall) server and virtual server for wide ip, i use health monitor is gateway_icmp but server and virtual server It keeps flapping between up and down, and the status is unstable. i was cli device F5 ping test to device generic host ok, its ok, its dont have lost or packet loss can you help me check issue
nvhoanhai
May 22, 2026 Place Technical Forum
139Views
0likes
1Comment
Question about healthchecks
Hello, We're publishing quite old server behind XC load balancer, and to make it work I had to lower "TLS Security Level" to Medium under Origin Pool > TLS. This works fine, however, without healthchecks. If I enable a simple healthcheck, for example: Host Header Value = my.hostname Path = / I start getting "503 Service Unavailable" errors. I checked the web server logs on the server and there are no hits, so I suspect the healthcheck uses newer TLS protocols/ciphers, therefore, it fails (as it used to fail when TLS Security Level was set by default to High). Can TLS protocols/ciphers used by the healthecks be configured? And second question, are there any logs that could be enabled for healthchecks? Thank you.
Solved
Teddy_Brewski
Mar 10, 2026 Place XC Users Forum
401Views
0likes
4Comments