Log Source IPs for Traffic Sent to a BIG-IP Virtual Address Port it is not Listening on
Warning Before using this iRule, please assess an potential impacts to your BIG-IP based on it's current performance as iRules can negatively impact the BIG-IP and its traffic management processing. Related Log Message 011e0001 Limiting closed port RST response from 501 to 500 packets/sec for traffic-group /Common/traffic-group-1 Create iRule Create an iRule by navigating to Local Traffic > iRules > iRule List > Create Name: log_source_ip_to_closed_ports Paste the code below into the “Definition” box. Click Finished, and sync to peer if needed/desired. when CLIENT_ACCEPTED { set client_ip [IP::client_addr] # source IP variable set virtual_server_ip [IP::local_addr] # destination IP a variable set virtual_server_port [TCP::local_port] # destination port variable # Log information to /var/log/ltm log local0. "Connection attempted to unsupported port: $client_ip to destination $virtual_server_ip:$virtual_server_port" } Create Reject Virtual Server Create a new virtual server by navigating to Local Traffic > Virtual Servers > Virtual Servers List > Create Name: reject_vs Type: reject Source Address: 0.0.0.0/0 Dest. Address: 0.0.0.0/0 Service Port: 0 *All Ports Protocol: * All Protocols Optionally specifics the VLANs and Tunnels the virtual server should listen on. ltm virtual reject_vs { destination 0.0.0.0:0 mask any profiles { fastL4 { } } reject rules { new_irule } serverssl-use-sni disabled source 0.0.0.0/0 translate-address enabled translate-port enabled vlans { External } vlans-enabled vs-index 26 }
Proactive Bot Defense Bypass by Bot Signature
Problem this snippet solves: This code enables you to bypass Proactive Bot Defense for a specific bot signature. Caution: If the signature is simple, it may be easy for an attacker to guess it and craft a response to match the signature and thus bypass Proactive Bot Defense with this in place. For this reason, another bypass solution is recommended where possible. You can bypass Proactive Bot Defense without this iRule by setting a benign category to "Report" and ensuring that the signature has a reverse DNS lookup in place. This will validate the source in addition to other factors such as the User-Agent. How to use this snippet: Add to the virtual server that is protected by Proactive Bot Defense and Bot Signatures. Enter the signature you want to bypass in the code where the example "curl" is placed currently. The signature's category must be set to report or block for this to take effect. Tested on v13.1. Code : when BOTDEFENSE_ACTION { #log local0. "signature: [BOTDEFENSE::bot_signature]" if { [BOTDEFENSE::bot_signature] ends_with "curl"} { BOTDEFENSE::action allow } }
DoS and NTLM Brute force protection for HTTP(s) traffic
Problem this snippet solves: This snippet has been designed to mainly protect against NTLM's Denial of Service and brute force attacks against web application that use this authentication mecanism. This irule help companies to fight against brute force attacks at the HTTP layer. You can combine this irule with another one on non-http traffic to provide a brute force protection across multiple layers. For pure HTTP application, you should prefer the Brute force protection provided by the ASM module. How to use this snippet: This irule should be installed on each Virtual Server that require NTLM protection. In a Microsoft Skype for Business deployment, you may need to protect following services : Web Services Conf Autodiscover Exchange Web Services TO BE DONE : Provide a way to unlock blocked users External links Github : https://github.com/e-XpertSolutions/f5 Related Articles DoS and NTLM Brute force protection for SIP flow Credits This irule is based on NTLM logger Code : when RULE_INIT { array set NTLMFlags { unicode 0x00000001 oem 0x00000002 req_target 0x00000004 unknown1 0x00000008 sign 0x00000010 seal 0x00000020 datagram 0x00000040 lmkey 0x00000080 netware 0x00000100 ntlm 0x00000200 unknown2 0x00000400 unknown3 0x00000800 ntlm_domain 0x00001000 ntlm_server 0x00002000 ntlm_share 0x00004000 NTLM2 0x00008000 targetinfo 0x00800000 128bit 0x20000000 keyexch 0x40000000 56bit 0x80000000 } set static::irule_name "irule-ntlm-bruteforce" set static::email_domain "domain.com" set static::user_domain "DOMAIN" set static::log_server "" set static::log_pri "local0." set static::fail_tab "NTLMfails" set static::blacklist_tab "NTLMblackhole" set static::userfail_tab "NTLMUserfails" set static::userblacklist_tab "NTLMUserblackhole" set static::max_failures 5 set static::fail_memory 300 set static::block_duration 300 } when CLIENT_ACCEPTED { if {[table lookup -subtable $static::blacklist_tab [IP::client_addr]] == 1} { log $static::log_pri "[virtual] - BLACKHOLED IPADDR [IP::client_addr]:[TCP::client_port] (Reputation=[IP::reputation [IP::client_addr]])" reject return } } when HTTP_REQUEST { if {[table lookup -subtable $static::blacklist_tab [IP::client_addr]] == 1} { log $static::log_pri "[virtual] - BLACKHOLED IPADDR [IP::client_addr]:[TCP::client_port] (Reputation=[IP::reputation [IP::client_addr]])" reject return } if {[HTTP::header Authorization] starts_with "NTLM "} { set ntlm_msg [ b64decode [split [lindex [HTTP::header Authorization] 1] ] ] binary scan $ntlm_msg a7ci protocol zero type if { $type eq 3 } { binary scan $ntlm_msg @12ssissississississii \ lmlen lmlen2 lmoff \ ntlen ntlen2 ntoff \ dlen dlen2 doff \ ulen ulen2 uoff \ hlen hlen2 hoff \ slen slen2 soff \ flags set ntlm_domain {}; binary scan $ntlm_msg @${doff}a${dlen} ntlm_domain set ntlm_user {}; binary scan $ntlm_msg @${uoff}a${ulen} ntlm_user set ntlm_host {}; binary scan $ntlm_msg @${hoff}a${hlen} ntlm_host set unicode [expr {$flags & 0x00000001}] if {$unicode} { set ntlm_domain_convert "" foreach i [ split $ntlm_domain ""] { scan $i %c c if {$c>1} { append ntlm_domain_convert $i } elseif {$c<128} { set ntlm_domain_convert $ntlm_domain_convert } else { append ntlm_domain_convert \\u[format %04.4X $c] } } set ntlm_domain $ntlm_domain_convert set ntlm_user_convert "" foreach i [ split $ntlm_user ""] { scan $i %c c if {$c>1} { append ntlm_user_convert $i } elseif {$c<128} { set ntlm_user_convert $ntlm_user_convert } else { append ntlm_user_convert \\u[format %04.4X $c] } } set ntlm_user $ntlm_user_convert set ntlm_host_convert "" foreach i [ split $ntlm_host ""] { scan $i %c c if {$c>1} { append ntlm_host_convert $i } elseif {$c<128} { set ntlm_host_convert $ntlm_host_convert } else { append ntlm_host_convert \\u[format %04.4X $c] } } set ntlm_host $ntlm_host_convert } binary scan $ntlm_msg @${ntoff}a${ntlen} ntdata binary scan $ntlm_msg @${lmoff}a${lmlen} lmdata binary scan $ntdata H* ntdata_h binary scan $lmdata H* lmdata_h set interesting 1 if { ($ntlm_domain equals $static::user_domain or [string tolower $ntlm_user] ends_with $static::email_domain) } { set attack 1 if {[table lookup -subtable $static::userblacklist_tab $ntlm_user] == 1} { # Block ntlm_user exceeding the number of failed logons in the timeout period log $static::log_pri "[virtual] - BLACKHOLED $ntlm_domain\\$ntlm_user from $ntlm_host at [IP::client_addr]:[TCP::client_port] (Reputation=[IP::reputation [IP::client_addr]])" reject return } else { log $static::log_pri "[virtual] - Login attempt by $ntlm_domain\\$ntlm_user from $ntlm_host for [HTTP::uri]." } } else { set attack 0 log $static::log_pri "[virtual] - Not a valid user - Login attempt by $ntlm_domain\\$ntlm_user from $ntlm_host for [HTTP::uri]." } return [list type $type flags [format 0x%08x $flags] \ ntlm_domain $ntlm_domain ntlm_host $ntlm_host ntlm_user $ntlm_user \ lmhash $lmdata nthash $ntdata] } } } when HTTP_RESPONSE { if {[info exists interesting] && $interesting == 1} { set client [IP::client_addr]:[TCP::client_port] set node [IP::server_addr]:[TCP::server_port] set nodeResp [HTTP::status] if { $nodeResp == 401 and ([info exists attack] and $attack == 1)} { log $static::log_pri "[virtual] - invalid credentials detected for $ntlm_user" table set -subtable $static::fail_tab -notouch -excl [IP::client_addr] 0 indef $static::fail_memory table incr -subtable $static::fail_tab [IP::client_addr] if {[table lookup -subtable $static::fail_tab [IP::client_addr]] >= $static::max_failures} { set now [clock seconds] set now_date [split [clock format $now -format {%X %x}] " "] set later [expr {$now + $static::block_duration}] set later_date [split [clock format $later -format {%X %x}] " "] log $static::log_pri "[virtual] - BLACKHOLING IPADDR - [IP::client_addr] (Reputation=[IP::reputation [IP::client_addr]]) at $now_date until $later_date" table set -subtable $static::blacklist_tab -excl [IP::client_addr] 1 indef $static::block_duration } if {[info exists ntlm_user]} { table set -subtable $static::userfail_tab -notouch -excl $ntlm_user 0 indef $static::fail_memory table incr -subtable $static::userfail_tab $ntlm_user if {[table lookup -subtable $static::userfail_tab $ntlm_user] >= $static::max_failures} { set now [clock seconds] set later [expr {$now + $static::block_duration}] log $static::log_pri "[virtual] - BLACKHOLING USER - $ntlm_user at $now_date until $later_date" table set -subtable $static::userblacklist_tab -excl $ntlm_user 1 indef $static::block_duration } } } } } Tested this on version: 11.5