/var/log/ has only 0% free | Big-IP PEM
Hi all, Unit: Big-IP Policy Enforcement Manager (PEM) Software: BIG-IP 13.1.1 Build 0.76.4 Engineering Hotfix Issue: /var/log/ has reached full capacity. We have started receiving Broadcast messages when connected via SSH, stating that Disk partition /var/log (slot 1) has only 0% free. As our regular F5 administrators are away I am unsure how to proceed. Broadcast message from root@hostname (Wed Jan 9 13:01:02 2019): 011d0004:3: Disk partition /var/log (slot 1) has only 0% free Here is the disk usage from /var/log/ and the culprit looks to be wr_urldbd.out. As shown below it's at a staggering 34G. We have another identical unit at another site which has this file @ 8.4M. [user@hostname:/S1-green-P::Active:Standalone] log ls -Slh | head -10 total 6.8G -rw-r--r--. 1 root root 34G 2019-01-09 13:04 wr_urldbd.out -rw-r--r--. 1 root root 4.7G 2019-01-09 13:01 wr_urldbd.out.1 -rw-------. 1 root root 2.1G 2018-10-27 21:45 zebos.log -rw-r--r--. 1 root root 1.1M 2018-10-24 14:37 restjavad-gc.log.0 -rw-r--r--. 1 root root 978K 2018-10-27 21:45 restjavad.1.log -rw-r--r--. 1 root root 688K 2019-01-09 12:53 restjavad-gc.log.0.current -rw-------. 1 root root 680K 2019-01-09 03:26 hitless_upgrade.log -rw-------. 1 root root 672K 2019-01-09 13:03 ltm -rw-r--r--. 1 root root 496K 2019-01-09 12:48 restjavad.0.log Tailing wr_urldbd.out yields - `[user@hostname:/S1-green-P::Active:Standalone] log tail wr_urldbd.out nGetRtuUpdateInfo: failed sConnectSocket to service.brightcloud.com failed connect to 570354308 on 8888, err = -1 nGetRtuUpdateInfo: failed sConnectSocket to service.brightcloud.com failed connect to 570354308 on 8888, err = -1 nGetRtuUpdateInfo: failed sConnectSocket to service.brightcloud.com failed connect to 570354308 on 8888, err = -1 nGetRtuUpdateInfo: failed sConnectSocket to service.brightcloud.com failed connect to 570354308 on 8888, err = -1 nGetRtuUpdateInfo: failed sConnectSocket to service.brightcloud.com failed connect to 570354308 on 8888, err = -1 As this unit is relatively new to our network, I suspect that configuration is yet to be finalised which is why it's being blocked - and I'm not too worried about that. What'd I'd like to know is the purpose of this file and if it would be safe to delete it? Thanks in advance. First time poster so please let me know if any additional information is required.
PEM Http-Redirect not working
Hi, we're currently facing a problem in redirecting a website to a custom block page. We managed to block the facebook but it doesn't redirecting to the block page. We created a policy on pem and add fb-block-rule: We use this iRule and applied it to a virtual server 192.168.0.23. when HTTP_REQUEST { HTTP::respond 200 content " FORBIDDEN SITE Hi there! Thanks for stopping by. But this page is restricted.. and you are being monitored. ===This is from your DCMD Administrator=== " } This is what we would like to show: We are hoping for your kind assistance. Thanks!
