Quick and dirty shell script to find unused certificates
Problem this snippet solves: This has been edited quite a bit since I first posted so it's probably not as quick and dirty as it was before. This in response to a question regarding removing unused certificateshttps://devcentral.f5.com/questions/how-to-find-the-unused-ssl-certificates-63166 The following bash script will output any installed certificate names to a file, then iterate over each line. If the certificate is not referenced in bigip.conf in either the /config/ or within a partition folder, then it can be reasonably assumed it is not in use and can be safely deleted. The script will give you the option to delete any certs that are not in use and save a UCS archive (just in case) If there are any keys associated with the certificate, this will be deleted too. As the moment, the script will not look for keys without an equivalent cert, e.g. my-cert.key and my-cert.crt. So you many still end up with rouge keys. I'll look to get this updated eventually. There is an array called ignoreCerts ignoreCerts=("f5-irule.crt" "ca-bundle.crt") Here you can add certificates you may want to ignore. For example, f5-irule.crt is used to sign F5 provided iRules and bigip.conf does not reference it. Add any additional certs to this array to ensure they are not deleted Script can be downloaded directly from GitLab using the link below https://gitlab.com/stratalabs/f5-devcental/snippets/1863498/raw?inline=false How to use this snippet: paste into vi chmod +x myScript.sh ./myScript.sh Code : #!/bin/sh function buildInstalledCertsArray { tmsh save sys config partitions all tmsh list sys file ssl-cert | awk '/crt/ {print $4}' | sed '/^[[:space:]]*$/d' > /var/tmp/installedCerts.tmp # iterate over tmp file to create array of used certificates while read line; do for i in "${!ignoreCerts[@]}"; do if [[ $line = ${ignoreCerts[$i]} ]]; then ignore="true" else if [[ $ignore != "true" ]];then ignore="" else # do not add cert to array if already added if [[ ! " ${instCertsArr[@]} " =~ " ${line} " ]]; then instCertsArr+=("$line") fi fi fi done done /dev/null 2>&1) if ! [ -z "$hasKey" ];then deleteKeys+=("${cert%.*}.key") fi done } function deleteUnusedCerts { if [ ${#deleteCerts[@]} -eq 0 ]; then echo "-------------------------------------------------------------------------" echo "There are no unused certificates to delete, existing" echo "-------------------------------------------------------------------------" exit 0 else echo "-------------------------------------------------------------------------" echo "The following keys are not in use can can be deleted:" for cert in "${deleteCerts[@]}"; do echo " ${cert}" done echo "-------------------------------------------------------------------------" read -p "would you like to delete these unused certificates? (y/n)?" answer case ${answer:0:1} in y|Y ) createUcsArchive echo "-------------------------------------------------------------------------" echo "deleting certs..." for cert in "${deleteCerts[@]}"; do delete sys file ssl-key $cert echo " $cert" done if [ ${#deleteKeys[@]} -eq 0 ]; then echo "-------------------------------------------------------------------------" echo "no associated keys to delete, exiting" exit 0 else echo "-------------------------------------------------------------------------" echo "deleting keys..." for key in "${deleteKeys[@]}"; do delete sys file ssl-key $cert echo "$key" exit 0 done fi ;; * ) exit 0 ;; esac fi } function createUcsArchive { echo today=`date +%Y-%m-%d.%H.%M.%S` echo "Creating UCS archive auto.${today}.ucs" tmsh save sys ucs ${today}.ucs } # initialise vars instCertsArr=() deleteCerts=() # ignore certs defined here - f5-irile.crt is used to sign F5 iRules ignoreCerts=("f5-irule.crt" "ca-bundle.crt") # build installed certificates array - excluding certs to ignore buildInstalledCertsArray # check if installed certs are used in bigip.conf (including partitions) - ltm sys files are exluded from results buildDeleteCertsArray # build list of associated keys (not all certs will have keys) buildDeleteKeysArray # optionally delete unused certs deleteUnusedCerts Tested this on version: No Version Found
Download a BIG-IP UCS archive with "curl".
Problem this snippet solves: Download a BIG-IP UCS archive using the program "curl" and verifies the output file's signature. Tested on 13.1.1. How to use this snippet: Edit the code to input the hostname of your F5 UI, admin credentials, source UCS file name (defaults to config.ucs), and the output file name. Code : #!/bin/bash # # Download a UCS archive (across a stable network) with curl. # #------------------------------------------------------------------------- F5_HOST='myhost.example.com' CREDENTIALS='admin:admin' FINAL_FILE='/tmp/config.ucs' ARCHIVE_NAME_ON_SERVER='config.ucs' DEBUG='' #------------------------------------------------------------------------- # # Get the md5 checksum for the archive. # #------------------------------------------------------------------------- ARCHIVE_CHECKSUM=$(curl -sku $CREDENTIALS -X POST -H "Content-type: application/json" \ -d "{\"command\":\"run\", \"utilCmdArgs\": \"-c '/usr/bin/md5sum /var/local/ucs/$ARCHIVE_NAME_ON_SERVER'\"}" \ https://$F5_HOST/mgmt/tm/util/bash | awk -F':' '{print $NF}' | awk -F'"' '{ print $2 }' | awk '{print $1}') [ -z "$ARCHIVE_CHECKSUM" ] && echo "Failed to get archive signature. Aborting." && exit 1 [ ! -z "$DEBUG" ] && echo "Archive checksum: $ARCHIVE_CHECKSUM" #------------------------------------------------------------------------- # # Find out the size of the archive and the size of the data packet. # #------------------------------------------------------------------------- Content_Range=$(curl -I -kv -u $CREDENTIALS -H 'Content-Type: application/json' -X GET "https://$F5_HOST/mgmt/shared/file-transfer/ucs-downloads/$ARCHIVE_NAME_ON_SERVER" 2>/dev/null | grep "Content-Range: " | cut -d ' ' -f 2) FIRST_CONTENT_RANGE=$(echo -n $Content_Range | cut -d '/' -f 1 | tr -d '\r') [ ! -z "$DEBUG" ] && echo -n "FIRST_CONTENT_RANGE: " [ ! -z "$DEBUG" ] && echo $FIRST_CONTENT_RANGE NUMBER_OF_LAST_BYTE=$(echo -n $FIRST_CONTENT_RANGE | cut -d '-' -f 2) [ ! -z "$DEBUG" ] && echo -n "NUMBER_OF_LAST_BYTE: " [ ! -z "$DEBUG" ] && echo $NUMBER_OF_LAST_BYTE INITIAL_CONTENT_LENGTH=$NUMBER_OF_LAST_BYTE CONTENT_LENGTH=$(($NUMBER_OF_LAST_BYTE+1)) [ ! -z "$DEBUG" ] && echo -n "CONTENT_LENGTH: " [ ! -z "$DEBUG" ] && echo $CONTENT_LENGTH DFILE_SIZE=$(echo -n $Content_Range | cut -d '/' -f 2 | tr -d '\r' ) [ ! -z "$DEBUG" ] && echo -n "DFILE_SIZE: " [ ! -z "$DEBUG" ] && echo $DFILE_SIZE LAST_END_BYTE=$((DFILE_SIZE-1)) CUMULATIVE_NO=0 [ ! -z "$DEBUG" ] && echo "CUMULATIVE_NO: $CUMULATIVE_NO" SEQ=0 LAST=0 #------------------------------------------------------------------------- # # Clean up: Remove the previous output file. # #------------------------------------------------------------------------- /bin/rm $FINAL_FILE 2>/dev/null #------------------------------------------------------------------------- # # Get the archive file. # #------------------------------------------------------------------------- while true do if [ $LAST -gt 0 ]; then [ ! -z "$DEBUG" ] && echo 'End of run reached.' break fi if [ $SEQ -eq 0 ]; then NEXT_RANGE=$FIRST_CONTENT_RANGE CUMULATIVE_NO=$NUMBER_OF_LAST_BYTE CONTENT_LENGTH=$INITIAL_CONTENT_LENGTH else START_BYTE=$(($CUMULATIVE_NO+1)) END_BYTE=$(($START_BYTE + $CONTENT_LENGTH)) if [ $END_BYTE -gt $LAST_END_BYTE ]; then [ ! -z "$DEBUG" ] && echo "END_BYTE greater than LAST_END_BYTE: $END_BYTE:$LAST_END_BYTE" LAST=1 let END_BYTE=$LAST_END_BYTE [ ! -z "$DEBUG" ] && echo "Getting the last data packet." fi NEXT_RANGE="${START_BYTE}-${END_BYTE}" CUMULATIVE_NO=$END_BYTE fi [ ! -z "$DEBUG" ] && echo "NEXT_RANGE: $NEXT_RANGE" let SEQ+=1 [ ! -z "$DEBUG" ] && echo "SEQ: $SEQ" OUTPUT_FILE_NAME="/tmp/$$_downloaded_ucs_archive_file_part_$SEQ"; curl -H "Content-Range: ${NEXT_RANGE}/${DFILE_SIZE}" -s -k -u $CREDENTIALS -H 'Content-Type: application/json' -X GET "https://$F5_HOST/mgmt/shared/file-transfer/ucs-downloads/$ARCHIVE_NAME_ON_SERVER" -o $OUTPUT_FILE_NAME cat $OUTPUT_FILE_NAME >> $FINAL_FILE /bin/rm $OUTPUT_FILE_NAME [ ! -z "$DEBUG" ] && echo "End of loop $SEQ" done #------------------------------------------------------------------------- # # Verify downloaded file. # #------------------------------------------------------------------------- FINAL_FILE_CHECKSUM=$(/usr/bin/md5sum $FINAL_FILE | awk '{print $1}') if [ "$FINAL_FILE_CHECKSUM" == "$ARCHIVE_CHECKSUM" ]; then echo "Download completed and verified." else echo "Downloaded file has incorrect checksum." exit 1 fi # END -------------------------------------------------------------------- Tested this on version: 13.0List BIG-IP Next Instance Backups on Central Manager
In the Central Manager GUI, you can create/schedule BIG-IP Next Instance backups, but outside of the listing shown there, you can't download the files from that view if you want to archive them for off-box requirements. Finding them in the Central Manager command line to download them via secure copy (scp) requires some kubernetes-fu knowhow, mainly, interrogating the persistent volume claims and persistent volumes: kubectl get pvc mbiq-local-storage-pv-claim -o yaml | grep volumeName kubectl get pv <volumename result> -o yaml | grep "path: " This script takes the guesswork out of all that and let's you focus on more important things. Example output: admin@cm1:~$ ./lbu.sh Backup path: /var/lib/rancher/k3s/storage/pvc-ae75faee-101e-49eb-89f7-b66542da1281_default_mbiq-local-storage-pv-claim/backup total 3860 4 drwxrwxrwx 2 root root 4096 Mar 7 19:33 . 4 drwxrwxrwx 7 root root 4096 Feb 2 00:01 .. 1780 -rw-r--r-- 1 ubuntu lxd 1821728 Feb 28 18:40 3b9ef4d8-0f0b-453d-b350-c8720a30db16.2024-02-28.18-39-59.backup.tar.gz 288 -rw-r--r-- 1 ubuntu lxd 292464 Feb 28 18:39 7bf4e3ac-e8a2-44a3-bead-08be6c590071.2024-02-28.18-39-15.backup.tar.gz 1784 -rw-r--r-- 1 ubuntu lxd 1825088 Mar 7 19:33 7bf4e3ac-e8a2-44a3-bead-08be6c590071.2024-03-07.19-32-56.backup.tar.gz Script Source
Use F5 LTM as HTTP Proxy
Problem this snippet solves: LTM product can be used as a HTTP Proxy for servers and PC. This code explains minimum requirements to configure proxy feature without SWG module (configurations from Explicit Forward Proxy documentation without documentation ) and without explicit proxy iApp. How to use this snippet: All these commands must be run in bash shell. Create HTTP PROXY VIRTUAL SERVER Configure variables used in next commands Variable HTTPBaseName is used to create : Resolver object : RESOLVER_${HTTPBaseName} HTTP profile : http_${HTTPBaseName} virtual server : VS_${HTTPBaseName} HTTPBaseName="HTTP_FORWARD_PROXY" VS_IP="192.168.2.80" VS_PORT="8080" create DNS resolver with your DNS server (1.1.1.1 is for demo using cloudflare) tmsh create net dns-resolver RESOLVER_${HTTPBaseName} { forward-zones replace-all-with { . { nameservers replace-all-with { 1.1.1.1:domain { } } } } route-domain 0 } create HTTP profile type explicit, using DNS resolver. The parameter default-connect-handling allow enables HTTPS connections without SSL inspection tmsh create ltm profile http http_${HTTPBaseName} { defaults-from http-explicit explicit-proxy { default-connect-handling allow dns-resolver RESOLVER_${HTTPBaseName} } proxy-type explicit } create HTTP proxy Virtual server tmsh create ltm virtual VS_${HTTPBaseName} { destination ${VS_IP}:${VS_PORT} ip-protocol tcp mask 255.255.255.255 profiles replace-all-with { http_${HTTPBaseName} { } tcp } source 0.0.0.0/0 source-address-translation { type automap } translate-address enabled translate-port enabled} ENABLE SSL FORWARD PROXY This section is not required to forward HTTPS requests but only to enable SSL inspection on HTTPS requests. Note : Following configuration requires SSL, Forward Proxy License. Configure variables used in next commands Variable SSLBaseName is used to create : certificate / key pair : ${SSLBaseName} Client SSL profile : clientssl_${SSLBaseName} Server SSL profile : serverssl_${SSLBaseName} virtual server : VS_${SSLBaseName} SSLBaseName="SSL_FORWARD_PROXY" dirname="/var/tmp" CASubject="/C=FR/O=DEMO\ COMPANY/CN=SSL\ FORWARD\ PROXY\ CA" Create self-signed certificate for CA purpose (not available in WebUI) Self-signed certificates created in WebUI doesn't have CA capability required for SSL FORWARD PROXY. openssl genrsa -out ${dirname}/${SSLBaseName}.key 4094 openssl req -sha512 -new -x509 -days 3650 -key ${dirname}/${SSLBaseName}.key -out ${dirname}/${SSLBaseName}.crt -subj "${CASubject}" Import certificates in TMOS tmsh install sys crypto key ${SSLBaseName}.key from-local-file ${dirname}/${SSLBaseName}.key; tmsh install sys crypto cert ${SSLBaseName}.crt from-local-file ${dirname}/${SSLBaseName}.crt; After CA Certificate is imported, browse in WebUI, retrieve it and import it in client browsers trusted CA Create SSL profiles for SSL FORWARD PROXY tmsh create ltm profile client-ssl clientssl_${SSLBaseName} { cert-lookup-by-ipaddr-port disabled defaults-from clientssl mode enabled proxy-ca-cert ${SSLBaseName}.crt proxy-ca-key ${SSLBaseName}.key ssl-forward-proxy enabled } tmsh create ltm profile server-ssl serverssl_${SSLBaseName} { defaults-from serverssl ssl-forward-proxy enabled } create SSL FORWARD PROXY Virtual server tmsh create ltm virtual VS_${SSLBaseName} { destination 0.0.0.0:https ip-protocol tcp profiles replace-all-with { clientssl_${SSLBaseName} { context clientside } serverssl_${SSLBaseName} { context serverside } http { } tcp { } } source 0.0.0.0/0 translate-address disabled translate-port disabled vlans replace-all-with { http-tunnel } vlans-enabled } Change HTTP EXPLICIT PROXY Default Connect Handling to Deny tmsh modify ltm profile http http_${HTTPBaseName} explicit-proxy { default-connect-handling deny } Note : These commands were tested in both 12.1 and 13.1 versions. Code : No Code
