"did not find any disks" error during performing clean installation on BIG-IP
My BIG-IP 6900's CF disk is faulty and the system doesn't boot. I tried to reinstall the OS on that disk. I followed below link's instruction do do installation by USB media. System boots from the USB but when I want to start installing the OS on the CF disk below error appears. ------------------------------------------------ bash (try 'info') / > diskinit -style volumes info: The following disks will be modified: CF1 *** *** WARNING: *** All software and data on this system is about to be destroyed! *** No bootable software images will remain. *** You will then need to install software to the system before *** it will again be bootable. *** (it is always possible to boot from USB devices) *** Ready to reformat.Continue? (y|n) [n] --> y info: Removing all filesystems, volumes, and partitions on hda. info: Shutting down volume group for hda info: Erasing di hda:sk hda hda1 hda: info: Removing all filesystems, volumes, and partitions on hda. info: Shutting down volume group for hda info: Erasing di hda:sk hda hda: error: tm_install::Process::Process_default_init -- did not find any disks. ------------------------------------------------ I tried to check the disk by fdisk and it was OK and I could format it by fdisk and partitioned it again without any error. I even changed the with a new one but same error appeared.