F5 login banner - GUI/CLI

Hello Team ,

I would like to set the login banner , Can you please confirm if the below command works ? Will this applicable for both GUI nad CLI banner ?

tmsh modify sys global-settings console-inactivity-timeout 900
tmsh modify sys gui-security-banner-text “THIS IS A TEST MACHINE.”
tmsh modify cli global-settings idle-timeout 15

Hi Sarovani,

GUI Banner:

tmsh modify sys global-settings gui-security-banner-text "THIS IS A TEST MACHINE."

CLI Banner:

tmsh modify sys sshd banner enabled banner-text "THIS IS A TEST MACHINE."

Impact of procedure: These changes may not be present after an upgrade or re-installation. Therefore, F5 does not officially recommend these changes. However, if the changes are required due to a security policy, ensure that the changes are verified after any upgrades. In addition, these changes may not propagate to HA peers and you must perform this procedure to all devices in the device group if required.

REF: myF5

Hi Sarovani,

For the command help that you have asked please see below

Task 1

tmsh modify sys global-settings console-inactivity-timeout 900
Task 2

tmsh modify sys gui-security-banner-text “THIS IS A TEST MACHINE.”
Task 3

tmsh modify cli global-settings idle-timeout 15

So in general here are the options available for SYS GOBAL-Settings options

root@(F5-Design_Engg02)(cfg-sync Standalone)(Active)(/Common)(tmos)# list sys global-settings
Options:
all-properties one-line
non-default-properties |
Properties:
aws-access-key 
aws-api-max-concurrency
aws-secret-key 
console-inactivity-timeout 
custom-addr 
description 
failsafe-action
file-blacklist-path-prefix
file-blacklist-read-only-path-prefix
file-local-path-prefix 
file-whitelist-path-prefix

gui-audit
gui-expired-cert-alert
gui-security-banner
gui-security-banner-text
gui-setup
host-addr-mode
hostname
hosts-allow-include
lcd-display
led-locator
mgmt-dhcp

net-reboot
password-prompt
quiet-boot
remote-host
ssh-max-session-limit
ssh-max-se

ssion-limit-per-user
ssh-root-session-limit
ssh-session-limit
username-prompt

TASK 1 (IN TMSH Mode)

=======

tmsh modify sys global-settings console-inactivity-timeout 900

======

Please take ucs backup before making changes .

First use list command to note the default settings in case you need to rever back or for your history purpose

root@(F5-Design_Engg02)(cfg-sync Standalone)(Active)(/Common)(tmos)# list sys global-settings console-inactivity-timeout
sys global-settings {
console-inactivity-timeout 0
}

The command you need in TMSH Mode

list sys global-settings console-inactivity-timeout

modify  sys global-settings console-inactivity-timeout 900

Task 2 (IN TMSH Mode) - This will apply onnly on the GUI

=======

tmsh modify sys gui-security-banner-text “THIS IS A TEST MACHINE.”

Here you need to check 2 command that GUI Security Banner should be enabled if not you have to modify and make it enable also to use the second part of this command.

root@(F5-Design_Engg02)(cfg-sync Standalone)(Active)(/Common)(tmos)# list sys global-settings gui-security-banner
sys global-settings {
gui-security-banner enabled
}

root@(F5-Design_Engg02)(cfg-sync Standalone)(Active)(/Common)(tmos)# list sys global-settings gui-security-banner-text
sys global-settings {
gui-security-banner-text "Welcome to the BIG-IP Configuration Utility.

Log in with your username and password using the fields on the left."
}

Modify Command

root@(F5-Design_Engg02)(cfg-sync Standalone)(Active)(/Common)(tmos)# modify sys global-settings gui-security-banner-text “THIS IS A TEST MACHINE”
root@(F5-Design_Engg02)(cfg-sync Standalone)(Active)(/Common)(tmos)#

Test /List again after changing banner

root@(F5-Design_Engg02)(cfg-sync Standalone)(Active)(/Common)(tmos)# list sys global-settings gui-security-banner-text sys global-settings {
gui-security-banner-text “THIS IS A TEST MACHINE”
}

TASK 3(IN TMSH Mode)

=========

tmsh modify cli global-settings idle-timeout 15

root@(F5-Design_Engg02)(cfg-sync Standalone)(Active)(/Common)(tmos)# list cli global-settings idle-timeout
cli global-settings {
idle-timeout disabled
}

list cli global-settings idle-timeout

tmsh modify cli global-settings idle-timeout 15

So leftover task is to set a Banner for pre login and post login on CLI please refer the following 2 articles

a pre-login or post-login message banner for the BIG-IP

Configure an advisory banner for the BIG-IP system

Hope this helps

:folded_hands:

HaveahappydayYayGIF (2).gif