How to log HTTP/2 reset_stream
Hello, We are currently in a meeting to prepare for HTTP/2 DDoS attacks. What we would like to do is log the client’s IP address (either local or remote) whenever an HTTP/2 RESET_STREAM is received. Is there any way to achieve this? Would it be possible to implement using an iRule? Thank you.F5 AWAF with HTTP/2, MRF and Websocket profiles
Good day all, I have F5 Big-IP AWAF's (version 16.1.4.3) and I am trying to configure HTTP/2 with MRF. My colleague and I discovered that Websocket profiles on the Virtual Server don't play well when enabling MRF. Is there a way to enable a "hybrid" configuration using websocket and HTTP/2 with MRF? I value and appreciate your time and energy and look forward to hearing from you. Thank you.
Problem with big packets using http2
Hi workmates, an application that passes through my F5 BIG-IP, requires for large post request, increasing the maximum header size from the default of 32k to 65k, and everything works perfectly, but only if I use http1.1.If i also enable the http2 profile, the packets are dropped by F5. Do you know if it is possible to use packets bigger than 32k using http2? My F5 version is this BIG-IP 15.1.6Incosistent forwarding of HTTP/2 connections with layered virtual
Hi, I'm using a layered virtual configuration: Tier1: Virtual applying SNI-Routing (only SSL persistence profile and LTM policy as described in https://www.devcentral.f5.com/kb/technicalarticles/sni-routing-with-big-ip/282018) Tier2: Virtual applies SSL termination and delivering the actual application, with the required profiles, iRules, .... If the required, an additional LTM policy is applied for URI-based routing and forwards to Tier3 VS. Tier3 (optional, if required): Virtual delivers specific applications, like microservices, usually no monolithical apps. This configuration is very robust and I'm working with it successfully since years. Important: The tier1 uses one single IP address and a single port. So all tier2 and tier3 virtuals MUST be externally available through the same IP address and port. Now I have to publish the first HTTP/2 applications over this concept and see strange behavior of the BIG-IP. User requests www.example.com. IP and port point to tier1 virtual. Tier1 LTM policy forwards the requests, based on the SNI, to tier2 virtuals "vs-int_www.example.com". Within www.example.com there are references to piwik.example.com, which is another tier2 virtual, behind my tier1 virtual. User requests piwik.example.com. IP and port point to tier1 virtual. Tier1 LTM policy forwards the requests to "vs-int_www.example.com" instead of "vs-int_piwik.example.com". Probably not based on SNI, but on the existing TCP connection. I'm afraid, that this bahvior is a result of HTTP/2, especially because of the persistent TCP connection. I assume that, because the connection ID (gathered from browser devtools) for requests to www.example.com and piwik.example.com is identical. From the perspective of the browser I wouldn't expect such a behavior, because the target hostname differs. I didn't configure HTTP/2 in full-proxy mode, as described in several articles. I've just enabled it on the client-side. I would be very happy for any input on that. Thanks in advance!
Settings when configuring http/2 for the client side only
We have used the http/2 settings at https://my.f5.com/manage/s/article/K04412053 and our flow is user mobile devices to BIG-IP is http/2. BIG-IP translates http/2 to http/1.1 then sends it to our back-end servers. 1. We have seen lot of Client connection closed error messages after turning on http/2 and trying to trace if any http/2 settings need to be changed from the default http/2 settings at https://my.f5.com/manage/s/article/K04412053 ? 2. How does BIG-IP translate http/2(received from user mobile devices) to http/1.1 and how can we check those settings to tweak them? 3. Anything else we should check for?gRPC load balancing with F5 and nginx
I've a requirement of using gRPC through F5 using nginx at the server level which will convert port 80 to gRPC port (50001). Flow would be like: Client will hit F5 over port 443 which invariably will forward the request to nginx over port 80 which will convert it again over designated port of gRPC (50001). I enabled HTTP2 settings in F5 but application is not responding. Is there any specific setting which i need to do for gRPC at F5 level? nginx is already configured to forward request over port 80 to http2.
