Proxy Protocol v2 Initiator
Problem this snippet solves: Proxy Protocol v1 related articles have already been posted on DevCentral, but there is no v2 support iRule code available. A customer wanted to support Proxy Protocol v2, so I wrote an iRule code for supporting v2. Proxy protocol for the BIG-IP (f5.com) How to use this snippet: Back-end server must handle Proxy header prior data exchange. Code : when CLIENT_ACCEPTED { # DEBUG On/Off set DEBUG 0 set v2_proxy_header "0d0a0d0a000d0a515549540a" # v2 version and command : 0x21 - version 2 & PROXY command set v2_ver_command "21" # v2 address family and transport protocol : 0x11 - AF_INET (IPv4) & TCP protocol set v2_af_tp "11" # v2 Address Size : 0x000C - 12 bytes for IPv4 + TCP set v2_address_length "000c" # Get TCP port - 2 byte hexadecimal format set src_port [format "%04x" [TCP::client_port]] set dst_port [format "%04x" [TCP::local_port]] # Get Src Address and convert to 4 byte hexadecimal format foreach val [split [IP::client_addr] "."] { append src_addr [format "%02x" $val] } # Get Dst Address and convert to 4 byte hexadecimal format foreach val [split [IP::local_addr] "."] { append dst_addr [format "%02x" $val] } # Build proxy v2 data set proxy_data [binary format H* "${v2_proxy_header}${v2_ver_command}${v2_af_tp}${v2_address_length}${src_addr}${dst_addr}${src_port}${dst_port}"] if { $DEBUG } { binary scan $proxy_data H* proxy_dump log local0. "[IP::client_addr]:[TCP::client_port]_[IP::local_addr]:[TCP::local_port] - proxy_data dump : $proxy_dump" } } when SERVER_CONNECTED { TCP::respond $proxy_data }
Weblogic JSessionID Persistence
Problem this snippet solves: Contributed by: unRuleY, Summarized by: deb Note: The previous version of this iRule contained escaped newlines following the session command, which in versions 10.0 - 10.2.0 causes TMM to core as documented in CR135937 / SOL11427. This was fixed in 10.2.1. See this related Codeshare example for details on how to take advantage of session replication on the WebLogic servers with targeted node failover in an iRule. Provides persistence on the jsessionid value found in either the URI or a cookie. When a request is received, the iRule first looks for a "jsessionid" cookie, and if not found, for a "jsessionid" parameter in the requested URI. If either is found, a persistence record is created if it doesn't already exist, or followed if it does. If neither is found, the request is load balanced according to the load balancing method applied to the virtual server and persisted based on the client's IP address. In order to ensure the second and subsequent requests follow the first, LTM must create a persistence record indicating the pool member to which the first request was load balanced. If the server is setting the jsessionid in a cookie, the persistence key value may be extracted from the server response to create the persistence record. If the server is setting the jsessionid in the URLs, source address persistence with a short timeout is recommended to track the original destination until the jsessionid is sent. How to use this snippet: To ensure a new persistence record is followed when a request is re-load balanced in a client-side Keep-Alive connection, apply a OneConnect profile to the virtual server. The iRule assumes the jsessionid is in upper case when used as a cookie name. If this isn't the case, please update the example. To persist on jsessionid, create the iRule below and create a custom Universal persistence profile, with Match Across Services enabled, that uses the iRule. Then use this custom Universal persistence profile as the Default Persistence profile on your Virtual Server. Applying a Fallback Persistence profile of type Source Address Affinity with a host mask and a short timeout (the default source_addr persistence profile will do the trick) to your Virtual Server is also recommended. Attention, if you are running firmware 11.0 - 11.2.1 and enabled "Match Across Services"! There is a bug inside. SOL14061 This iRule requires LTM v10. or higher. Code : when HTTP_REQUEST { # Log details for the request set log_prefix "[IP::client_addr]:[TCP::client_port]" log local0. "$log_prefix: Request to [HTTP::uri] with cookie: [HTTP::cookie value JSESSIONID]" # Check if there is a JSESSIONID cookie if { [HTTP::cookie "JSESSIONID"] ne "" }{ # Persist off of the cookie value with a timeout of 1 hour (3600 seconds) persist uie [string tolower [HTTP::cookie "JSESSIONID"]] 3600 # Log that we're using the cookie value for persistence and the persistence key if it exists. log local0. "$log_prefix: Used persistence record from cookie. Existing key? [persist lookup uie [string tolower [HTTP::cookie "JSESSIONID"]]]" } else { # Parse the jsessionid from the path. The jsessionid, when included in the URI, is in the path, # not the query string: /path/to/file.ext;jsessionid=1234?param=value set jsess [findstr [string tolower [HTTP::path]] "jsessionid=" 11] # Use the jsessionid from the path for persisting with a timeout of 1 hour (3600 seconds) if { $jsess != "" } { persist uie $jsess 3600 # Log that we're using the path jessionid for persistence and the persistence key if it exists. log local0. "$log_prefix: Used persistence record from path: [persist lookup uie $jsess]" } } } when HTTP_RESPONSE { # Check if there is a jsessionid cookie in the response if { [HTTP::cookie "JSESSIONID"] ne "" }{ # Persist off of the cookie value with a timeout of 1 hour (3600 seconds) persist add uie [string tolower [HTTP::cookie "JSESSIONID"]] 3600 log local0. "$log_prefix: Added persistence record from cookie: [persist lookup uie [string tolower [HTTP::cookie "JSESSIONID"]]]" } }
Dynamic FQDN Node DNS Resolution based on URI with Route Domains and Caching iRule
Problem this snippet solves: Following on from the code share Ephemeral Node FQDN Resolution with Route Domains - DNS Caching iRule that I posted, I have made a few modifications based on further development and comments/questions in the original share. On an incoming HTTP request, this iRule will dynamically query a DNS server (out of the appropriate route domain) defined in a pool to determine the IP address of an FQDN ephemeral node depending on the requesting URI. The IP address will be cached in a subtable so to prevent querying on every HTTP request It will also append the route domain to the node and replace the HTTP Host header. Features of this iRule * Dynamically resolves FQDN node from requesting URI * Iterates through other DNS servers in a pool if response is invalid or no response * Caches response in the session table using custom TTL * Uses cached result if present (prevents DNS lookup on each HTTP_REQUEST event) * Appends route domain to the resolved node * Replaces host header for outgoing request How to use this snippet: Add a DNS pool with appropriate health monitors, in this example the pool is called dns_pool Add the lookup datagroup, dns_lookup_dg . This defines the parameters of the DNS query. The values in the datagroup will built up an array using the key in capitals to define the array object e.g. $myArray(FQDN) Modify the values as required: FQDN: the FQDN of the node to load balance to. DNS-RD: the outbound route domain to reach the DNS servers NODE-RD: the outbound route domain to reach the node TTL: TTL value for the DNS cache in seconds ltm data-group internal dns_lookup_dg { records { /app1 { data "FQDN app1.my-domain.com|DNS-RD %10|NODE-RD %20|TTL 300|PORT 8443" } /app2 { data "FQDN app2.my-other-domain.com|DNS-RD %10|NODE-RD %20|TTL 300|PORT 8080" } default { data "FQDN default.domain.com|DNS-RD %10|NODE-RD %20|TTL 300|PORT 443" } } type string } Code : ltm data-group internal dns_lookup_dg { records { /app1 { data "FQDN app1.my-domain.com|DNS-RD %10|NODE-RD %20|TTL 300|PORT 8443" } /app2 { data "FQDN app2.my-other-domain.com|DNS-RD %10|NODE-RD %20|TTL 300|PORT 8080" } default { data "FQDN default.domain.com|DNS-RD %10|NODE-RD %20|TTL 300|PORT 443" } } type string } when CLIENT_ACCEPTED { set dnsPool "dns_pool" set dnsCache "dns_cache" set dnsDG "dns_lookup_dg" } when HTTP_REQUEST { # set datagroup values in an array if {[class match -value [HTTP::uri] "starts_with" $dnsDG]} { set dnsValues [split [string trim [class match -value [HTTP::uri] "starts_with" $dnsDG]] "| "] } else { # set to default if URI is not defined in DG set dnsValues [split [string trim [class match -value "default" "equals" $dnsDG]] "| "] } if {([info exists dnsValues]) && ($dnsValues ne "")} { if {[catch { array set dnsArray $dnsValues set fqdn $dnsArray(FQDN) set dnsRd $dnsArray(DNS-RD) set nodeRd $dnsArray(NODE-RD) set ttl $dnsArray(TTL) set port $dnsArray(PORT) } catchErr ]} { log local0. "failed to set DNS variables - error: $catchErr" event disable return } } # check if fqdn has been previously resolved and cached in the session table if {[table lookup -notouch -subtable $dnsCache $fqdn] eq ""} { log local0. "IP is not cached in the subtable - attempting to resolve IP using DNS" # initialise loop vars set flgResolvError 0 if {[active_members $dnsPool] > 0} { foreach dnsServer [active_members -list $dnsPool] { set dnsResolvIp [lindex [RESOLV::lookup @[lindex $dnsServer 0]$dnsRd -a $fqdn] 0] # verify result of dns lookup is a valid IP address if {[scan $dnsResolvIp {%d.%d.%d.%d} a b c d] == 4} { table set -subtable $dnsCache $fqdn $dnsResolvIp $ttl # clear any error flag and break out of loop set flgResolvError 0 set nodeIpRd $dnsResolvIp$nodeRd break } else { call ${partition}log local0."$dnsResolvIp is not a valid IP address, attempting to query other DNS server" set flgResolvError 1 } } } else { call ${partition}log local0."ERROR no DNS servers are availible" event disable return } #log error if query answers are invalid if {$flgResolvError} { call ${partition}log local0."ERROR unable to resolve $fqdn" unset -nocomplain dnsServer dnsResolvIp dnsResolvIp event disable return } } else { # retrieve cached IP from subtable (verification of resolved IP compelted before being commited to table) set dnsResolvIp [table lookup -notouch -subtable $dnsCache $fqdn] set nodeIpRd $dnsResolvIp$nodeRd log local0. "IP found in subtable: $dnsResolvIp with TTL: [table timeout -subtable $dnsCache -remaining $fqdn]" } # rewrite outbound host header and set node IP with RD and port HTTP::header replace Host $fqdn node $nodeIpRd $port log local0. "setting node to $nodeIpRd $port" } Tested this on version: 12.1Managing Model Context Protocol in iRules - Part 3
In part 2 of this series, we took a look at a couple iRules use cases that do not require the json or sse profiles and don't capitalize on the new JSON commands and events introduced in the v21 release. That changes now! In this article, we'll take a look at two use cases for logging MCP activity and removing MCP tools from a servers tool list. Event logging This iRule logs various HTTP, SSE, and JSON-related events for debugging and monitoring purposes. It provides clear visibility into request/response flow and detects anomalies or errors. How it works HTTP_REQUEST Logs each HTTP request with its URI and client IP. Example: "HTTP request received: URI /example from 192.168.1.1" SSE_RESPONSE Logs when a Server-Sent Event (SSE) response is identified. Example: "SSE response detected successfully." JSON_REQUEST and JSON_RESPONSE Logs when valid JSON requests or responses are detected Examples: "JSON Request detected successfully" JSON Response detected successfully" JSON_REQUEST_MISSING and JSON_RESPONSE_MISSING Logs if JSON payloads are missing from requests or responses. Examples: "JSON Request missing." "JSON Response missing." JSON_REQUEST_ERROR and JSON_RESPONSE_ERROR Logs when there are errors in parsing JSON during requests or responses. Examples: "Error processing JSON request. Rejecting request." "Error processing JSON response." iRule: Event Logging when HTTP_REQUEST { # Log the event (for debugging) log local0. "HTTP request received: URI [HTTP::uri] from [IP::client_addr]" when SSE_RESPONSE { # Triggered when a Server-Sent Event response is detected log local0. "SSE response detected successfully." } when JSON_REQUEST { # Triggered when the JSON request is detected log local0. "JSON Request detected successfully." } when JSON_RESPONSE { # Triggered when a Server-Sent Event response is detected log local0. "JSON response detected successfully." } when JSON_RESPONSE_MISSING { # Triggered when the JSON payload is missing from the server response log local0. "JSON Response missing." } when JSON_REQUEST_MISSING { # Triggered when the JSON is missing or can't be parsed in the request log local0. "JSON Request missing." } when JSON_RESPONSE_ERROR { # Triggered when there's an error in the JSON response processing log local0. "Error processing JSON response." #HTTP::respond 500 content "Invalid JSON response from server." } when JSON_REQUEST_ERROR { # Triggered when an error occurs (e.g., malformed JSON) during JSON processing log local0. "Error processing JSON request. Rejecting request." #HTTP::respond 400 content "Malformed JSON payload. Please check your input." } MCP tool removal This iRule modifies server JSON responses by removing disallowed tools from the result.tools array while logging detailed debugging information. How it works JSON parsing and logging print procedure - recursively traverses and logs the JSON structure, including arrays, objects, strings, and other types. jpath procedure - extracts values or JSON elements based on a provided path, allowing targeted retrieval of nested properties. JSON response handling When JSON_RESPONSE is triggered: Logs the root JSON object and parses it using JSON::root. Extracts the tools array from result.tools. Tool removal logic Iterates over the tools array and retrieves the name of each tool. If the tool name matches start-notification-stream: Removes it from the array using JSON::array remove. Logs that the tool is not allowed. If the tool does not match: Logs that the tool is allowed and moves to the next one. Logging information Logs all JSON structures and actions: Full JSON structure. Extracted tools array. Tools allowed or removed. Input JSON Response { "result": { "tools": [ {"name": "start-notification-stream"}, {"name": "allowed-tool"} ] } } Modified Response { "result": { "tools": [ {"name": "allowed-tool"} ] } } iRule: Remove tool list # Code to check JSON and print in logs proc print { e } { set t [JSON::type $e] set v [JSON::get $e] set p0 [string repeat " " [expr {2 * ([info level] - 1)}]] set p [string repeat " " [expr {2 * [info level]}]] switch $t { array { log local0. "$p0\[" set size [JSON::array size $v] for {set i 0} {$i < $size} {incr i} { set e2 [JSON::array get $v $i] call print $e2 } log local0. "$p0\]" } object { log local0. "$p0{" set keys [JSON::object keys $v] foreach k $keys { set e2 [JSON::object get $v $k] log local0. "$p${k}:" call print $e2 } log local0. "$p0}" } string - literal { set v2 [JSON::get $e $t] log local0. "$p\"$v2\"" } default { set v2 [JSON::get $e $t] log local0. "$p$v2" } } } proc jpath { e path {d .} } { if { [catch {set v [call jpath2 $e $path $d]} err] } { return "" } return $v } proc jpath2 { e path {d .} } { set parray [split $path $d] set plen [llength $parray] set i 0 for {} {$i < [expr {$plen }]} {incr i} { set p [lindex $parray $i] set t [JSON::type $e] set v [JSON::get $e] if { $t eq "array" } { # array set e [JSON::array get $v $p] } else { # object set e [JSON::object get $v $p] } } set t [JSON::type $e] set v [JSON::get $e $t] return $v } # Modify in response when JSON_RESPONSE { log local0. "JSON::root" set root [JSON::root] call print $root set tools [call jpath $root result.tools] log local0. "root = $root tools= $tools" if { $tools ne "" } { log local0. "TOOLS not empty" set i 0 set block_tool "start-notification-stream" while { $i < 100 } { set name [call jpath $root result.tools.${i}.name] if { $name eq "" } { break } if { $name eq $block_tool } { log local0. "tool $name is not alowed" JSON::array remove $tools $i } else { log local0. "tool $name is alowed" incr i } } } else { log local0. "no tools" } } Conclusion This not only concludes the article, but also this introductory series on managing MCP in iRules. Note that all these commands handle all things JSON, so you are not limited to MCP contexts. We look forward to what the community will build (and hopefully share back) with this new functionality! NOTE: This series is ghostwritten. Awaiting permission from original author to credit.Managing Model Context Protocol in iRules - Part 2
In the first article in this series, we took a look at what Model Context Protocol (MCP) is, and how to get the F5 BIG-IP set up to manage it with iRules. In this article, we'll take a look at the first couple of use cases with session persistence and routing. Note that the use cases in this article do not require the json or sse profiles to work. That will change in part 3. Session persistence and routing This iRule ensures session persistence and traffic routing for three endpoints: /sse, /messages, and /mcp. It injects routing information (f5Session) via query parameters or headers, processes them for routing to specific pool members, and transparently forwards requests to the server. How it works Client sends HTTP GET request to SSE endpoint of server (typically /sse): GET /sse HTTP/1.1 Server responds 200 OK with an SSE event stream. It includes an SSE message with an "event" field of "endpoint", which provides the client with a URI where all its future HTTP requests must be sent. This is where servers might include a session ID: event: endpoint data: /messages?sessionId=abcd1234efgh5678 NOTE: the MCP spec does not specify how a session ID can be encoded in the endpoint here. While we have only seen use of a sessionId query parameter, theoretically a server could implement its session Ids with any arbitrary query parameter name, or even as part of the path like this: event: endpoint data: /messages/abcd1234efgh5678 Our iRule can take advantage of this mechanism by injecting a query parameter into this path that tells us which server we should persist future requests to. So when we forward the SSE message to the client, it looks something like this: event: endpoint data: /messages?f5Session=some_pool_name,10.10.10.5:8080&sessionId=abcd1234efgh5678 or event: endpoint data: /messages/abcd1234efgh5678?f5Session=some_pool_name,10.10.10.5:8080 When the client sends a subsequent HTTP request, it will use this endpoint. Thus, when processing HTTP requests, we can read the f5Session secret we inserted earlier, route to that pool member, and then remove our secret before forwarding the request to the server using the original endpoint/sessionId it provided. Load Balancing when HTTP_REQUEST { set is_req_to_sse_endpoint false # Handle requests to `/sse` (Server-Sent Event endpoint) if { [HTTP::path] eq "/sse" } { set is_req_to_sse_endpoint true return } # Handle `/messages` endpoint persistence query processing if { [HTTP::path] eq "/messages" } { set query_string [HTTP::query] set f5_sess_found false set new_query_string "" set query_separator "" set queries [split $query_string "&"] ;# Split query string into individual key-value pairs foreach query $queries { if { $f5_sess_found } { append new_query_string "${query_separator}${query}" set query_separator "&" } elseif { [string match "f5Session=*" $query] } { # Parse `f5Session` for persistence routing set pmbr_info [string range $query 10 end] set pmbr_parts [split $pmbr_info ","] if { [llength $pmbr_parts] == 2 } { set pmbr_tuple [split [lindex $pmbr_parts 1] ":"] if { [llength $pmbr_tuple] == 2 } { pool [lindex $pmbr_parts 0] member [lindex $pmbr_parts 1] set f5_sess_found true } else { HTTP::respond 404 noserver return } } else { HTTP::respond 404 noserver return } } else { append new_query_string "${query_separator}${query}" set query_separator "&" } } if { $f5_sess_found } { HTTP::query $new_query_string } else { HTTP::respond 404 noserver } return } # Handle `/mcp` endpoint persistence via session header if { [HTTP::path] eq "/mcp" } { if { [HTTP::header exists "Mcp-Session-Id"] } { set header_value [HTTP::header "Mcp-Session-Id"] set header_parts [split $header_value ","] if { [llength $header_parts] == 3 } { set pmbr_tuple [split [lindex $header_parts 1] ":"] if { [llength $pmbr_tuple] == 2 } { pool [lindex $header_parts 0] member [lindex $header_parts 1] HTTP::header replace "Mcp-Session-Id" [lindex $header_parts 2] } else { HTTP::respond 404 noserver } } else { HTTP::respond 404 noserver } } } } when HTTP_RESPONSE { # Persist session for MCP responses if { [HTTP::header exists "Mcp-Session-Id"] } { set pool_member [LB::server pool],[IP::remote_addr]:[TCP::remote_port] set header_value [HTTP::header "Mcp-Session-Id"] set new_header_value "$pool_member,$header_value" HTTP::header replace "Mcp-Session-Id" $new_header_value } # Inject persistence information into response payloads for Server-Sent Events if { $is_req_to_sse_endpoint } { set sse_data [HTTP::payload] ;# Get the SSE payload # Extract existing query params from the SSE response set old_queries [URI::query $sse_data] if { [string length $old_queries] == 0 } { set query_separator "" } else { set query_separator "&" } # Insert `f5Session` persistence information into query set new_query "f5Session=[URI::encode [LB::server pool],[IP::remote_addr]:[TCP::remote_port]]" set new_payload "?${new_query}${query_separator}${old_queries}" # Replace the payload in the SSE response HTTP::payload replace 0 [string length $sse_data] $new_payload } } Persistence when CLIENT_ACCEPTED { # Log when a new TCP connection arrives (useful for debugging) log local0. "New TCP connection accepted from [IP::client_addr]:[TCP::client_port]" } when HTTP_REQUEST { # Check if this might be an SSE request by examining the Accept header if {[HTTP::header exists "Accept"] && [HTTP::header "Accept"] contains "text/event-stream"} { log local0. "SSE Request detected from [IP::client_addr] to [HTTP::uri]" # Insert a custom persistence key (optional) set sse_persistence_key "[IP::client_addr]:[HTTP::uri]" persist uie $sse_persistence_key } } when HTTP_RESPONSE { # Ensure this is an SSE connection by checking the Content-Type if {[HTTP::header exists "Content-Type"] && [HTTP::header "Content-Type"] equals "text/event-stream"} { log local0. "SSE Response detected for [IP::client_addr]. Enabling persistence." # Use the same persistence key for the response persist add uie $sse_persistence_key } } Conclusion Thank you for your patience! Now is the time to continue on to part 3 where we'll finally get into the new JSON commands and events added in version 21! NOTE: This series is ghostwritten. Awaiting permission from original author to credit.Managing Model Context Protocol in iRules - Part 1
The Model Context Protocol (MCP) was introduced by Anthropic in November of 2024, and has taken the industry by storm since. MCP provides a standardized way for AI applications to connect with external data sources and tools through a single protocol, eliminating the need for custom integrations for each service and enabling AI systems to dynamically discover and use available capabilities. It's gained rapid industry adoption because major model providers and numerous IDE and tool makers have embraced it as an open standard, with tens of thousands of MCP servers built and widespread recognition that it mostly solves the fragmented integration challenge that previously plagued AI development. In this article, we'll take a look at the MCP components, how MCP works, and how you can use the JSON iRules events and commands introduced in version 21 to control the messsaging between MCP clients and servers. MCP components Host The host is the AI application where the LLM logic resides, such as Claude Desktop, AI-powered IDEs like Cursor, Open WebUI with the mcpo proxy like in our AI Step-by-Step labs, or via custom agentic systems that receive user requests and orchestrate the overall interaction. Client The client exists within the host application and maintains a one-to-one connection with each MCP server, converting user requests into the structured format that the protocol can process and managing session details like timeouts and reconnects. Server Servers are lightweight programs that expose data and functionality from external systems, whether internal databases or external APIs, allowing connections to both local and remote resources. Multiple clients can exist within a host, but each client has a dedicated (or perceived in the case of using a proxy) 1:1 relationship with an MCP server. MCP servers expose three main types of capabilities: Resources - information retrieval without executing actions Tools - performing side effects like calculations or API requests Prompts - reusable templates and workflows for LLM-server communication Message format (JSON-RPC) The transport layer between clients and servers uses JSON-RPC format for two-way message conversion, allowing the transport of various data structures and their processing rules. This enforces a consistent request/response format across all tools, so applications don't have to handle different response types for different services. Transport options MCP supports three standard transport mechanisms: stdio (standard input/output for local connections), Server-Sent Events (SSE for remote connections with separate endpoints for requests and responses), and Streamable HTTP (a newer method introduced in March 2025 that uses a single HTTP endpoint for bidirectional messaging). NOTE: SSE transport has been deprecated as of protocol version 2024-11-05 and replaced by Streamable HTTP, which addresses limitations like lack of resumable streams and the need to maintain long-lived connections, though SSE is still supported for backward compatibility. MCP workflow Pictures tell a compelling story. First, the diagram. The steps in the diagram above are as follows: The MCP client requests capabilities from the MCP server The MCP server provides a list of available tools and services the MCP client sends the question and the retrieved MCP server tools and services to the LLM The LLM specifies which tools and services to use. The MCP client calls the specific tool or service The MCP server returns the result/context to the MCP client The MCP client passes the result/context to the LLM The LLM uses the result/context to prepare the answer iRules MCP-based use cases There are a bunch of use cases for MCP handling, such as: Load-balancing of MCP traffic across MCP Servers High availability of the MCP Servers MCP message validation on behalf of MCP servers MCP protocol inspection and payload modification Monitoring the MCP Servers' health and their transport protocol status. In case of any error in MCP request and response, BIG-IP should be able to detect and report to the user Optimization Profiles Support Use OneConnect Profile Use Compression Profile Security support for MCP servers. There are no native features for this yet, but you can build your own secure business logic into the iRules logic for now. LTM profiles Configuring MCP involves creating two profiles - an SSE profile and a JSON profile - and then attaching them to a virtual server. The SSE profile is for backwards compatibility should you need it in your MCP client/server environment. The defaults for these profiles are shown below. [root@ltm21a:Active:Standalone] config # tmsh list ltm profile sse all-properties ltm profile sse sse { app-service none defaults-from none description none max-buffered-msg-bytes 65536 max-field-name-size 1024 partition Common } [root@ltm21a:Active:Standalone] config # tmsh list ltm profile json all-properties ltm profile json json { app-service none defaults-from none description none maximum-bytes 65536 maximum-entries 2048 maximum-non-json-bytes 32768 partition Common } These can be tuned down from these maximums by creating custom profiles that will meet the needs of your environment, for example (without all properties like above): [root@ltm21a:Active:Standalone] config # tmsh create ltm profile sse sse_test_env max-buffered-msg-bytes 1000 max-field-name-size 500 [root@ltm21a:Active:Standalone] config # tmsh create ltm profile json json_test_env maximum-bytes 3000 maximum-entries 1000 maximum-non-json-bytes 2000 [root@ltm21a:Active:Standalone] config # tmsh list ltm profile sse sse_test_env ltm profile sse sse_test_env { app-service none max-buffered-msg-bytes 1000 max-field-name-size 500 } [root@ltm21a:Active:Standalone] config # tmsh list ltm profile json json_test_env ltm profile json json_test_env { app-service none maximum-bytes 3000 maximum-entries 1000 maximum-non-json-bytes 2000 } NOTE: Both profiles have database keys that can be temporarily enabled for troubleshooting purposes. The keys are log.sse.level and log.json.level. You can set the value for one or both to debug. Do not leave them in debug mode! Conclusion Now that we have the laid the foundation, continue on to part 2 where we'll look at the first two use cases. NOTE: This series is ghostwritten. Awaiting permission from original author to credit.F5 AWAF/ASM ASM_RESPONSE_VIOLATION event seem to not trigger on 17.1.x
Hey Everyone, The F5 AWAF/ASM ASM_RESPONSE_VIOLATION event seem to not trigger on 17.1.x. I have enabled irules support the waf policy and I tested in Normal and Compatibility mode but no luck. The other events trigger without an issue. I created 2 custom signatures for response and request match and request match one has no issues so it seems a bug to me. This can be easily tested with the below irule that logs to /var/log/asm when ASM_REQUEST_DONE { log local3. "test request" } when ASM_RESPONSE_VIOLATION { log local3. "test response" } The custom response signature is in the policy to just trigger alarm. I tried string or regex match " (?i)failed " PCRE-style as F5 15.x and up are using this regex style.F5 BIG-IP Multi-Site Dashboard
Code is community submitted, community supported, and recognized as ‘Use At Your Own Risk’. A comprehensive real-time monitoring dashboard for F5 BIG-IP Application Delivery Controllers featuring multi-site support, DNS hostname resolution, member state tracking, and advanced filtering capabilities. A 170KB modular JavaScript application runs entirely in your browser, served directly from the F5's high-speed operational dataplane. One or more sites operate as Dashboard Front-Ends serving the dashboard interface (HTML, JavaScript, CSS) via iFiles, while other sites operate as API Hosts providing pool data through optimized JSON-based dashboard API calls. This provides unified visibility across multiple sites from a single interface without requiring even a read-only account on any of the BIG-IPs, allowing you to switch between locations and see consistent pool, member, and health status data with almost no latency and very little overhead. Think of it as an extension of the F5 GUI: near real-time state tracking, DNS hostname resolution (if configured), advanced search/filtering, and the ability to see exactly what changed and when. It gives application teams and operations teams direct visibility into application pool state without needing to wait for answers from F5 engineers, eliminating the organizational bottleneck that slows down troubleshooting when every minute counts. https://github.com/hauptem/F5-Multisite-Dashboard
How to log HTTP/2 reset_stream
Hello, We are currently in a meeting to prepare for HTTP/2 DDoS attacks. What we would like to do is log the client’s IP address (either local or remote) whenever an HTTP/2 RESET_STREAM is received. Is there any way to achieve this? Would it be possible to implement using an iRule? Thank you.
