Forum Discussion
Thanks Niels for pointing this out.
I did consider using a seperate RD for the server vlan however was not sure if LTM can route traffic via the external vlan which is part of the default RD 0 anyway. Example, can LTM route the RD 1 traffic via the RD 0 external vlan (defualt external gateway) or any specific config required on the RD1 to achieve this?
Also the nodes in the server VLAN has a virtual server VIP for incoming traffic for an application. Moving server vlan to another RD will have an impact on this too?
Regards,
It's probably best to have each route domain connected to the upstream router/gateway directly. I think in this setup using parent route domains will not work, because then the F5 will again route the traffic internally. These are things that are best to tested in a test environment before making changes on the production environment. Then you also get an idea what the impact will be on the current setup.