Forum Discussion
Smithy
Feb 13, 2020Cirrostratus
Hi Alex,
Yes, they should be in the RDP file. I removed "use multimon:i:1" and "span monitors:i:1" for this test from the above configuration.
This is the RDP file from my test with only "redirectclipboard:i:0" included in the "Customer Parameters":
authentication level:i:0
enablecredsspsupport:i:0
full address:s:rdsh1.f5.demo
gatewayaccesstoken:s:uLOn/y2GmR7_fHAEtXsw9w
gatewaycredentialssource:i:5
gatewayhostname:s:rdp.f5.demo
gatewayprofileusagemethod:i:1
gatewayusagemethod:i:1
redirectclipboard:i:0
server port:i:3389
Cheers,
Brett
- Alex_TsangFeb 13, 2020Nimbostratus
Hi Brett
We finally find that the custom parameters will apply after we reboot the system, so I believe this may be bug in my release and we opened case in F5.
Best regards
Alex Tsang