Config Sync Failing?

[Kalido]

Hi Guys,

So I am attempting to config sync the LB's because I can see that some configuration is missing the Active is the latest and the others do not have specific configurations matching.

When I did the config sync I got these errors:

Sync Failed

A validation error occurred while syncing to a remote device

Sync error on fb-adcmgmt-01.net.com: Load failed from /Common/rj-adcmgmt-01.net.com 01070734:3: Configuration error: invalid static route, the dest/netmask pair 0.0.0.0%1/0.0.0.0 already exists for /DMZ-PreProd/DMZ-GW

Sync error on fb-adcmgmt-02.net.com: Load failed from /Common/rj-adcmgmt-01.net.com 01070734:3: Configuration error: invalid static route, the dest/netmask pair 0.0.0.0%1/0.0.0.0 already exists for /DMZ-PreProd/DMZ-GW

Sync error on r9-adcmgmt-01.net.com: Load failed from /Common/rj-adcmgmt-01.net.com 01070734:3: Configuration error: invalid static route, the dest/netmask pair 0.0.0.0%1/0.0.0.0 already exists for /DMZ-PreProd/DMZ-GW

4 devices with 3 different configurations

2 devices made last configuration change on Tue Jul 28 10:54:41 2020

r9-adcmgmt-01.net.com made last configuration change on Tue Jul 28 11:38:58 2020

This device made last configuration change on Tue Jul 28 11:45:50 2020

Recommended action: Review the error message and determine corrective action on the device

What I do not understand is that if these routes are already in place wouldn't it mean that they are synced?

and if not how can I force push the latest config from the main primary active LB to the rest?