Virtual server unreachable with 3g and 4g only ADSL

Hello Team,

on our production , we have a virtual server with two node . the web site is published on port 443 , it was working normaly but 5 days ago it’s doesn’t work with 3G and LTE connexion and works good with ADSL .

there are no restriction in firewall and when i see traffic bigip on this virtual server , i see all IP address range reach the VS but the web site return ERR_SSL_PROTOCOL_ERR .

certificat on virtual server is good when i checked with sslabs

procol profile : Fast Layer 4

someone has any idea ?

Thanx you

Best regards

If the virtual server is a Fastl4, then the certificate comes from the pool member - FastL4 is a TCP passthrough with no SSL termination. Any SSL protocol issues are between the pool member and the client.

Try getting a tcpdump of the traffic between a client and the virtual server, and look at the ClientHello, ServerHello and any Fatal alerts to see who terminates the handshake.

To me, it sounds like a Certificate Trust issue with mobile clients, but I’d need more data to be sure.

hello Blakely ,

please can you give me the command please to use it ?

thanx a lot

Regards

Hello ,

this is return log with TCPDUMP

13 2 0.0193 (0.0000) S>C Handshake

ServerHello

Version 3.3

session_id[32]=

19 55 fc 80 e4 56 e3 6d 73 3b aa 33 a4 0d 09 64

d3 71 e4 ae 20 15 98 2e c7 11 ca ad 1e b2 99 44

cipherSuite     TLS_RSA_WITH_AES_256_CBC_SHA

compressionMethod          NULL

13 3 0.0193 (0.0000) S>C Handshake

Certificate

13 4 0.0193 (0.0000) S>C Handshake

ServerHelloDone

13 5 0.1083 (0.0889) C>S Handshake

ClientKeyExchange

13 6 0.1083 (0.0000) C>S ChangeCipherSpec

13 7 0.1083 (0.0000) C>S Handshake

13 8 0.1099 (0.0016) S>C Alert

level      fatal

value      handshake_failure

13  0.1099 (0.0000) S>C TCP FIN

13  0.1274 (0.0174) C>S TCP FIN

So the server is rejecting the handshake after the ChangeCipherSpec:

There should be a value (just a number) for the fatal alert.

What is that?

this is capture about error

source : our virtual server on BIG-IP and Destination is client IP

Regards

Handshake Failure (40)

Handshake Failure 40 indicates “No shared ciphers”

If this is a FastL4 virtual, then the LTM is not part of this conversation, and you will need to look at your server logs to determine why this is occurring.

It could be that the conversation has selected TLS_RSA_WITH_AES_256_CBC_SHA but the server does not have a RSA signed certificate, or it rejects either RSA or CBC ciphers.

Can you check to see a working conversation to see what has been selected?

There is a knowledge article to assist troubleshooting: K15292: Troubleshooting SSL/TLS handshake failures.