I have two servers behind virtual-service. When sending traffic to the IP of the virtual-service the F5 successfully change the IP address of the destination IP and send it to the designated server. The problem I see is that traffic initiated from the server itself to another component in network is not routed by F5. I susspect these kind of packets are discarded by F5. I made disiable to the virtual-service pool and saw the same. In addition, when changing configuration should I activate it? I see that only reset really change the parameters.
If you want the F5 to route traffic from the Server you’ll need to create a Virtual Server to do this and enable the VS on the interface that connects to the server.