syslog config on Big IP 6900 10.2.4

Hello, I am trying to find the command to send the logs from F5 to local Syslog server in our organization , we need to send alerts in case any node goes down . thanks for help

Hi Amit, For bigpipe (should still be there in 10.2.4, I guess…) bigpipe syslog remote server { syslog-name {host local ip } }

Set the syslog server via tmsh modify sys syslog remote-servers add { syslog-name { host local-ip } }

thanks Mar , So I have to use one of the two option right ? 1) bigpipe syslog remote server { syslog-name {host local ip } }

2)Set the syslog server via tmsh modify sys syslog remote-servers add { syslog-name { host local-ip } }

Hi Amit,

Yes - just one of these (I’d go with the tmsh one, as bigpipe will be gone if you upgrade to 11.x :wink: )

don’t forget to do a “tmsh save sys config” afterwards to save your configuration to disc.

Best Regards, Markus

It gives me below error , when I try to enter command bigpipe syslog remote server 10.1.1.1

bigpipe syslog remote server 10.1.1.1 BIGpipe parsing error: 012e0022:3: The requested value (10.1.1.1) is invalid (show | | none) [add | delete]) for ‘remote server’ in ‘syslog’

unfortunately, I do not have a 10.2.4 machine to test this by myself available… why don’t you just go with the tmsh command? it should be working and if there is any trouble, try to hit the TAB key. This should give you a hint what is wrong.

when i try to use " tmsh modify sys syslog remote-servers add { server1.net { host 10.7.1.1 } } " using tab when i enter tmsh m it doesnt give me modify option , below is output config tmsh monitors/

Hi Amit,

I just see that the devcentral seems to cut my commands, that I sent to you…

modify sys syslog remote-servers add { syslog-name { host local-ip } }

Does it work like this?

modify sys syslog remote-servers add { syslog-name { host “syslog-ip-address” local-ip “ip-of-LB-from-which-it-sends” } }

hello Thanks I am able to run tmsh command now , below output shows the syslog server added is there any other check i need to do to check if logs are gettibng sent config bigpipe syslog list all syslog { authpriv from notice authpriv to emerg cron from warning cron to emerg daemon from notice daemon to emerg include none kern from notice kern to emerg mail from notice mail to emerg messages from notice messages to warning userlog from notice userlog to emerg remote server server1.net { host 10.7.1.1 local ip none remote port 514 } }

amit,

at tmsh prompt just type:

modify sys syslog remote-servers add { server1.net { host 10.7.1.1 } }

this should work.

As for the bigpipe command, try:

bigpipe syslog remote server {server1.net {host 10.7.1.1}}

I haven’t got a 10.x lab to test at the mo though.

Hope this helps, N

you could activate audit logging and log into the machine and take a tcpdump at the same time. In that way you should see the outgoing paket. or you check the syslog server itself…