Slective Snat

I need to come up with selective snat that will only snat vip to vip traffic and not snat client to application traffic.

internal interface:

10.x.188..x /24

External interface (Vip Traffic):

10.x.186.x /24

I think this will work bu not sure?

when LB_SELECTED {

if {[IP::addr “10.x.186.0/24” equals 10.x.186.0/24]} {

snat automap

}

}

I took it from this selective snat irule that I found in the samples section.

when LB_SELECTED {

if {[IP::addr “[IP::client_addr]/24” equals “[LB::server addr]/24”]} {

snat automap

}

}

any help would be greatly apreciated.

I believe that the sample will work for you

when LB_SELECTED {

if {[IP::addr “[IP::client_addr]/24” equals “[LB::server addr]/24”]} {

snat automap

}

}

thanks CB

Do need to put the client ip information or are these standard varibles? LB::server addr

IP::client_addr]/24

The IP::client_addr is the going to pull the client address that is requesting the VIP.