REST Trying to modify a sys db setup.run

I am trying to disable the first time setup utility remotely using REST. When I make the rest request: -- it looks like it works but the change does not seem to take place on the remote device -- GET requests for the setting show it changed but checking locally show it has not changed

I am not understanding something here.

I am trying to run the command equivalent to “tmsh modify sys db setup.run value false”

-- Here is the value locally on the LTM:

tmsh list sys db setup.run

sys db setup.run { value “true” }

-- Here I make the rest request to change from “true” to “false”:

curl -ks -H “Content-Type: application/json” -u admin:admin https://10.3.214.110/mgmt/tm/sys/db/setup.run -X PUT -d ‘{“value”: “false”}’ |json-format |grep -v warning {

“kind”: “tm:sys:db:dbstate”, “name”: “setup.run”, “fullPath”: “setup.run”, “generation”: 137, “selfLink”: “\u003d11.5.0”, “defaultValue”: “true”, “scfConfig”: “false”, “value”: “false”, “valueRange”: “false true” }

Here I check value with a GET request (shows “false”: curl -ks -H “Content-Type: application/json” -u admin:admin https://10.3.214.110/mgmt/tm/sys/db/setup.run |json-format |grep -v warning { “kind”: “tm:sys:db:dbstate”, “name”: “setup.run”, “fullPath”: “setup.run”, “generation”: 137, “selfLink”: “\u003d11.5.0”, “defaultValue”: “true”, “scfConfig”: “false”, “value”: “false”, “valueRange”: “false true” }

-- Here I check locally on LTM and it shows true:

tmsh list sys db setup.run

sys db setup.run { value “true” }

Any help understanding will be appreciated.

  • Tim

Sorry, That was a mess, posting again in plain text:

I am trying to disable the first time setup utility remotely using REST. 
When I make the rest request: 
-- it looks like it works but the change does not seem to take place on the remote device
-- GET requests for the setting show it changed but checking locally show it has not changed

I am not understanding something here.

I am trying to run the command equivalent to "tmsh modify sys db setup.run value false"

-- Here is the value locally on the LTM:

 tmsh list sys db setup.run

sys db setup.run {
    value "true"
}

-- Here I make the rest request to change from "true" to "false":

 curl  -ks -H "Content-Type: application/json"  -u admin:admin [https://10.3.214.110/mgmt/tm/sys/db/setup.run](https://10.3.214.110/mgmt/tm/sys/db/setup.run) -X PUT -d '{"value": "false"}' |json-format |grep -v warning                  {

"kind": "tm:sys:db:dbstate",
  "name": "setup.run",
  "fullPath": "setup.run",
  "generation": 137,
  "selfLink": "[https://localhost/mgmt/tm/sys/db/setup.run?ver](https://localhost/mgmt/tm/sys/db/setup.run?ver)\u003d11.5.0",
  "defaultValue": "true",
  "scfConfig": "false",
  "value": "false",
  "valueRange": "false true"
}

Here I check value with a GET request (shows "false":
  curl  -ks -H "Content-Type: application/json"  -u admin:admin [https://10.3.214.110/mgmt/tm/sys/db/setup.run](https://10.3.214.110/mgmt/tm/sys/db/setup.run)  |json-format |grep -v warning
{
  "kind": "tm:sys:db:dbstate",
  "name": "setup.run",
  "fullPath": "setup.run",
  "generation": 137,
  "selfLink": "[https://localhost/mgmt/tm/sys/db/setup.run?ver](https://localhost/mgmt/tm/sys/db/setup.run?ver)\u003d11.5.0",
  "defaultValue": "true",
  "scfConfig": "false",
  "value": "false",
  "valueRange": "false true"
}

-- Here I check locally on LTM and it shows true:

 tmsh list sys db setup.run

sys db setup.run {
    value "true"
}

Any help understanding will be appreciated.

*   Tim

Hi Tim,

works for me ok on 11.5.1hf5 - could be a bug, not connecting to the wrong unit by any change - I’ve done that before..

Thanks Arpydays for checking. I am trying on 11.6.0 final. I will make sure I am sending to the correct device (good advice). And try on 11.5.x to check that I am not doing something else wrong. Thanks

this is mine.

before

[root@ve11d:Active:In Sync] config  tmsh list sys db setup.run
sys db setup.run {
    value "true"
}
[root@ve11d:Active:In Sync] config  tmsh list sys global-settings all-properties
sys global-settings {
    aws-access-key none
    aws-api-max-concurrency 1
    aws-secret-key none
    console-inactivity-timeout 0
    custom-addr none
    description none
    failsafe-action go-offline-restart-tm
    file-local-path-prefix "{/shared/} {/tmp/}"
    gui-security-banner enabled
    gui-security-banner-text "Welcome to the BIG-IP Configuration Utility.

Log in with your username and password using the fields on the left."
    gui-setup enabled
    host-addr-mode management
    hostname ve11d.acme.local
    hosts-allow-include none
    lcd-display enabled
    mgmt-dhcp disabled
    net-reboot disabled
    password-prompt Password
    quiet-boot enabled
    remote-host none
    username-prompt Username
}
[root@ve11d:Active:In Sync] config  curl -sk -u admin:admin https://localhost/mgmt/tm/sys/global-settings | /var/tmp/jq .
{
  "kind": "tm:sys:global-settings:global-settingsstate",
  "selfLink": "https://localhost/mgmt/tm/sys/global-settings?ver=11.6.0",
  "awsApiMaxConcurrency": 1,
  "consoleInactivityTimeout": 0,
  "customAddr": "none",
  "failsafeAction": "go-offline-restart-tm",
  "fileLocalPathPrefix": "{/shared/} {/tmp/}",
  "guiSecurityBanner": "enabled",
  "guiSecurityBannerText": "Welcome to the BIG-IP Configuration Utility.\n\nLog in with your username and password using the fields on the left.",
  "guiSetup": "enabled",
  "hostAddrMode": "management",
  "hostname": "ve11d.acme.local",
  "lcdDisplay": "enabled",
  "mgmtDhcp": "disabled",
  "netReboot": "disabled",
  "passwordPrompt": "Password",
  "quietBoot": "enabled",
  "usernamePrompt": "Username"
}

 after

[root@ve11d:Active:In Sync] config  curl -sk -u admin:admin https://localhost/mgmt/tm/sys/global-settings -X PUT -H "Content-Type: application/json" -d '{"guiSetup":"disabled"}' | /var/tmp/jq .
{
  "kind": "tm:sys:global-settings:global-settingsstate",
  "selfLink": "https://localhost/mgmt/tm/sys/global-settings?ver=11.6.0",
  "awsApiMaxConcurrency": 1,
  "consoleInactivityTimeout": 0,
  "customAddr": "none",
  "failsafeAction": "go-offline-restart-tm",
  "fileLocalPathPrefix": "{/shared/} {/tmp/}",
  "guiSecurityBanner": "enabled",
  "guiSecurityBannerText": "Welcome to the BIG-IP Configuration Utility.\n\nLog in with your username and password using the fields on the left.",
  "guiSetup": "disabled",
  "hostAddrMode": "management",
  "hostname": "ve11d.acme.local",
  "lcdDisplay": "enabled",
  "mgmtDhcp": "disabled",
  "netReboot": "disabled",
  "passwordPrompt": "Password",
  "quietBoot": "enabled",
  "usernamePrompt": "Username"
}
[root@ve11d:Active:In Sync] config  curl -sk -u admin:admin https://localhost/mgmt/tm/sys/global-settings | /var/tmp/jq .
{
  "kind": "tm:sys:global-settings:global-settingsstate",
  "selfLink": "https://localhost/mgmt/tm/sys/global-settings?ver=11.6.0",
  "awsApiMaxConcurrency": 1,
  "consoleInactivityTimeout": 0,
  "customAddr": "none",
  "failsafeAction": "go-offline-restart-tm",
  "fileLocalPathPrefix": "{/shared/} {/tmp/}",
  "guiSecurityBanner": "enabled",
  "guiSecurityBannerText": "Welcome to the BIG-IP Configuration Utility.\n\nLog in with your username and password using the fields on the left.",
  "guiSetup": "disabled",
  "hostAddrMode": "management",
  "hostname": "ve11d.acme.local",
  "lcdDisplay": "enabled",
  "mgmtDhcp": "disabled",
  "netReboot": "disabled",
  "passwordPrompt": "Password",
  "quietBoot": "enabled",
  "usernamePrompt": "Username"
}
[root@ve11d:Active:In Sync] config  tmsh list sys db setup.run
sys db setup.run {
    value "false"
}
[root@ve11d:Active:In Sync] config  tmsh list sys global-settings
sys global-settings {
    gui-setup disabled
    hostname ve11d.acme.local
    mgmt-dhcp disabled
}

Arpydays was right. I was pointing it at the wrong host. Duh! Thanks Nitass also.

PUT https:///mgmt/tm/sys/global-settings -d ‘{“guiSetup”:“disabled”}’

Doing this alone will still drop you into the network setup utility when you login to the Configuration utility. So far the only way around this that seems to work is to configure a network object using REST such as a vlan prior to logging on to the CU.

To configure vlans see K13225405: Common iControl REST API command examples. myF5