NTP between APM Bigip and AD Server

Hello everyone

I have a problem of lag between the APM horairre bigap and AD server APM is connect with the AD server to check whether the Client workstations are allowed to access at AMP I have previously reported the address AD server IP as the NTP server stands but it still does not work , Will there be another configuration to put the BigIP ?

thank you for your help.

NTP works well with a hierarchy of time servers to it may be worth adding a higher stratum NTP server to both devices and ensure they are syncronised like that.

Are you certain that the BIG-IP is synchronising to the AD server? You can check that with ntpq -p.

the BIG-IP isn’t synchronising to the AD server even if the AD server is declared as NTP server on the BIG-IP my question is how to configure the ntp on the BIG-IP ?

thank you for your help.

Will there be another configuration to put the BigIP ?

no, that should be all you need.

have you tried ntpq -np as Pete suggested?

sol10240: Verifying NTP peer server communications

you may try to force a clock update using ntpdate.

ntpdate -u

thank you for your answers but I want to know if the synchronization between the AD server and BIGIP is periodic (uses a time interval)

thank you for your help.

I want to know if the synchronization between the AD server and BIGIP is periodic (uses a time interval)

i remember interval is managed by ntpd (bigip does not control it) and it is not static interval (it is automatically adjusted by ntpd).