irule to load custom page via ifile when HTTP::status !200

Good day, DevCentral is an incredible resource but I thought I throw out my specific scenario for the community’s opinion.

We’re looking to load a “friendly” page via ifile to send to the end-user when the response from a pool member is not 200. I’m not a coder at all but hopefully this is close enough to get my idea across:

when HTTP_RESPONSE {

if { [HTTP::status] != “200”} {

switch [HTTP::status] {

404 { [ifile get 404.html]

}

503 { [ifile get 503.html]

}

default { [ifile get Unexpected.html]

}

}

}

}

I’m looking for a “catch-all” at the bottom to trap any custom errors our web front-end might send.

I’ll probably want to add other “good” codes in addition to 200 (like redirect) but this is sort of just proof-of-concept for now.

Thanks for your time!

i understand you need HTTP::respond to send ifile content.

e.g.

root@(ve11a)(cfg-sync Changes Pending)(Active)(/Common)(tmos) list ltm virtual bar
ltm virtual bar {
    destination 172.28.20.111:80
    ip-protocol tcp
    mask 255.255.255.255
    pool foo
    profiles {
        http { }
        tcp { }
    }
    rules {
        myrule
    }
    source 0.0.0.0/0
    source-address-translation {
        type automap
    }
    vlans-disabled
}
root@(ve11a)(cfg-sync Changes Pending)(Active)(/Common)(tmos) list ltm pool foo
ltm pool foo {
    members {
        200.200.200.101:80 {
            address 200.200.200.101
        }
    }
}
root@(ve11a)(cfg-sync Changes Pending)(Active)(/Common)(tmos) list ltm rule myrule
ltm rule myrule {
    when HTTP_RESPONSE {
  if { [HTTP::status] != 200 } {
    HTTP::respond 200 content [ifile get simpletext_ifile] noserver
  }
}
}

[root@ve11a:Active:Changes Pending] config  ssldump -Aed -nni 0.0 port 80
New TCP connection 1: 172.28.19.251(50701) <-> 172.28.20.111(80)
1374884126.3182 (0.0021)  C>S
---------------------------------------------------------------
GET /fake HTTP/1.1
User-Agent: curl/7.15.5 (i686-redhat-linux-gnu) libcurl/7.15.5 OpenSSL/0.9.8b zlib/1.2.3 libidn/0.6.5
Host: 172.28.20.111
Accept: */*

---------------------------------------------------------------

New TCP connection 2: 200.200.200.14(50701) <-> 200.200.200.101(80)
1374884126.3201 (0.0018)  C>S
---------------------------------------------------------------
GET /fake HTTP/1.1
User-Agent: curl/7.15.5 (i686-redhat-linux-gnu) libcurl/7.15.5 OpenSSL/0.9.8b zlib/1.2.3 libidn/0.6.5
Host: 172.28.20.111
Accept: */*

---------------------------------------------------------------

1374884126.3231 (0.0030)  S>C
---------------------------------------------------------------
HTTP/1.1 404 Not Found
Date: Sat, 27 Jul 2013 00:12:18 GMT
Server: Apache/2.2.3 (CentOS)
Content-Length: 280
Content-Type: text/html; charset=iso-8859-1



404 Not Found

Not Found
The requested URL /fake was not found on this server.

Apache/2.2.3 (CentOS) Server at 172.28.20.111 Port 80

---------------------------------------------------------------

1374884126.3232 (0.0050)  S>C
---------------------------------------------------------------
HTTP/1.0 200 OK
Connection: Keep-Alive
Content-Length: 25

this is new simple text.
---------------------------------------------------------------

Great thanks.

I’m now on phase 2 of my issues :slight_smile:

Loading the image file; I have the png loaded as an ifile but can’t seem to link to it from the html

This seems to work (at least the 404 part which I’ve tested):

when HTTP_RESPONSE {

if { [HTTP::status] != “200”} {

switch [HTTP::status] {

“404” { HTTP::respond 200 content [ifile get “/Common/404.html”] noserver

}

“503” { HTTP::respond 200 content [ifile get “/Common/503.html”] noserver

}

default { HTTP::respond 200 content [ifile get “/Common/unexpected.html”] noserver

}

}

}

}

These html pages all link to a png file (our logo) which isn’t loading.

All of the articles I’ve found related to linking to an image file using ifile is of this type:

when HTTP_REQUEST {

if { [HTTP::uri] eq “/” } {

HTTP::respond 200 content [ifile get testapp_index_txt]

} elseif { [HTTP::uri] eq “/f5b_mini.png” } {

HTTP::respond 200 content [ifile get testapp_f5ball_img]

} else { discard }

}

Can I use HTTP_RESPONSE to evaluate the HTTP::status and then use HTTP_REQUEST to deliver the ifiles in one irule?

Great thanks.

I’m now on phase 2 of my issues :slight_smile:

Loading the image file; I have the png loaded as an ifile but can’t seem to link to it from the html

This seems to work (at least the 404 part which I’ve tested):

when HTTP_RESPONSE {

if { [HTTP::status] != “200”} {

switch [HTTP::status] {

“404” { HTTP::respond 200 content [ifile get “/Common/404.html”] noserver

}

“503” { HTTP::respond 200 content [ifile get “/Common/503.html”] noserver

}

default { HTTP::respond 200 content [ifile get “/Common/unexpected.html”] noserver

}

}

}

}

These html pages all link to a png file (our logo) which isn’t loading.

All of the articles I’ve found related to linking to an image file using ifile is of this type:

when HTTP_REQUEST {

if { [HTTP::uri] eq “/” } {

HTTP::respond 200 content [ifile get testapp_index_txt]

} elseif { [HTTP::uri] eq “/f5b_mini.png” } {

HTTP::respond 200 content [ifile get testapp_f5ball_img]

} else { discard }

}

Can I use HTTP_RESPONSE to evaluate the HTTP::status and then use HTTP_REQUEST to deliver the ifiles in one irule?

These html pages all link to a png file (our logo) which isn’t loading. case sensitive (i.e. filename) is not an issue, is it?

by the way, have you ever used http analyzer tool such as httpfox? i think it could be helpful when troubleshooting.

httpfox

https://addons.mozilla.org/en-us/firefox/addon/httpfox/

Can I use HTTP_RESPONSE to evaluate the HTTP::status and then use HTTP_REQUEST to deliver the ifiles in one irule?i understand what you are doing now (i.e. respond html page in HTTP_RESPONSE and image in HTTP_REQUEST) is correct.

I ended up using html with the logo embedded so I could do it all in HTTP_RESPONSE.

I had an issue with it working in IE but not FF or Chrome; had to set the Content-Type header for it to work for all:

when HTTP_RESPONSE {

if { [HTTP::status] != “200”} {

switch [HTTP::status] {

“404” { HTTP::respond 200 -version 1.1 content [ifile get “/Common/404.html”] noserver “Content-Type” “text/html; charset=utf-8”

}

“503” { HTTP::respond 200 -version 1.1 content [ifile get “/Common/503.html”] noserver “Content-Type” “text/html; charset=utf-8”

}

default { HTTP::respond 200 -version 1.1 content [ifile get “/Common/unexpected.html”] noserver “Content-Type” “text/html; charset=utf-8”

}

}

}

}