# IPsec tunnel mode

**URL:** <https://community.f5.com/t/ipsec-tunnel-mode/59486>\
**Category:** Technical Forums\
**Tags:** big-ip, ltm, application-delivery\
**Created:** [March 20, 2017, 1:36pm UTC](https://community.f5.com/t/ipsec-tunnel-mode/59486 "2017-03-20T13:36:06Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Ilian\_Ivanov](https://avatars.discourse-cdn.com/v4/letter/i/edb3f5/32.png) [@Ilian\_Ivanov](https://community.f5.com/u/Ilian_Ivanov)\
**Post date:** [March 20, 2017, 1:36pm UTC](https://community.f5.com/t/ipsec-tunnel-mode/59486/1 "2017-03-20T13:36:06Z")

</div>

Can I use F5`s external floating IP for a IPsec peer tunnel local address? Also, is that gona have a negative impact to any production traffic going trought the floating IP?

For example: External floating IP: 1.1.1.1/24

And one more question: Can I use 1.1.1.2 for peer IP if it is not configured as self IP?

I have read that article: [404 Page not found | BIG-IP Documentation](https://support.f5.com/kb/en-us/products/big-ip_ltm/manuals/product/tmos-implementations-11-2-0/11.html) but its not clear what IP address should be used for tunnel local address.

---

<div class="post-metadata">

**Author:** ![Ilian\_Ivanov](https://avatars.discourse-cdn.com/v4/letter/i/edb3f5/32.png) [@Ilian\_Ivanov](https://community.f5.com/u/Ilian_Ivanov)\
**Post date:** [May 23, 2017, 10:08am UTC](https://community.f5.com/t/ipsec-tunnel-mode/59486/2 "2017-05-23T10:08:33Z")

</div>

Update:

So.. the F5 floating IP can be used as a peer tunnel local address (actually you must use self or floating IP). In my case there were no impact on any production traffic. The IPsec tunnel is running as expected.
