how to create a Statistics Profile

Hello everyone:

I need see the total connections for a specific network in a vserver. I´m reading about cretion irule but i need some help! con you help me? I have one f5 ltm 6900 v10.2.4

THAK´S

Hello everyone:

I need see the total connections for a specific network in a vserver. I´m reading about creation irule but i need some help! can you help me? I have one f5 ltm 6900 v10.2.4

THAnK´S (sorry for my vocabulary)

e.g.

[root@ve10:Active] config  b virtual bar list
virtual bar {
   snat automap
   pool foo
   destination 172.28.19.79:80
   ip protocol 6
   rules myrule
   profiles {
      mystats {}
      tcp {}
   }
}
[root@ve10:Active] config  b profile mystats list
profile stats mystats {
   defaults from stats
   field1 net172
   field2 net192
   field3 others
}
[root@ve10:Active] config  b rule myrule list
rule myrule {
   when CLIENT_ACCEPTED {
   if { [IP::addr [IP::client_addr] equals 172.28.19.0/16] } {
      STATS::incr mystats net172 1
   } elseif { [IP::addr [IP::client_addr] equals 192.168.206.0/24] } {
      STATS::incr mystats net192 1
   } else {
      STATS::incr mystats others 1
   }
}
}

[root@ve10:Active] config  b profile mystats
PROFILE STATS mystats   parent stats
|      net172: 100
|      net192: 1
|      others: 0

ooooo thank´s i try it.

ooooo thank´s i try it.

Hi there

This is Danims team mate. We tried the configuration above without success. We tried this “switch” statement variant with the same poor results too:

when CLIENT_ACCEPTED {

switch [ IP::addr [IP::client_addr]] {

10.120.0.0/16 { STATS::incr mystats Stats_GER 1 }

10.110.0.0/16 { STATS::incr mystats Stats_CZ 1 }

default { STATS::incr mystats Stats_Other 1 }

}

}

The point is only “Stats_Other” is being increased. The other containers are not, and we suspect it is beause of bad iRule definition.

Confirmed. the iRule has a problem. If I set the first if condition to “true”, first field stars to increase.

¿Any suggestions with the iRule networks evaluation?

I’m not sure switch matches client addresses to subnets like an if statement would? If it does, you need some quotation marks at least;

when CLIENT_ACCEPTED { 
  switch [IP::addr [IP::client_addr]] { 
   "10.120.0.0/16" { STATS::incr mystats Stats_GER 1 } 
   "10.110.0.0/16" { STATS::incr mystats Stats_CZ 1 } 
   default { STATS::incr mystats Stats_Other 1 } 
   } 
 } 
 [/code

We included the quotation in at the network definitions and still doesn’t work. I’m very disappointed with the iRules languaje. I thought I would be more reliable and intuitive, but every time we need an iRule working, it needs rewriting and testing again and again util it works (when it does so!).

I don’t know what it can be. “switch” statement, “if + elseif”, quotation, network definition (many ways)… I’mt stuck with this. ¿Should I open a case to F5 support to get helped with this?

PS: Thanks What Lies Beneath and nitas for your interest and help. As soon as we get with the solution, will post here. Regards.

As with anything, experience and practise make things rather easier. So, just to be clear, you have created a Statistics Profile called ‘mystats’ and relevant counters with the names specified above and then assigned that profile to the Virtual Server yes? And everything matches case-wise? Remember everything is case sensitive with iRules.

Then you’ve tried something like this and it isn’t working - note I’ve added some logging which might help and gone back to if statements?

when CLIENT_ACCEPTED {
 if { [IP::addr [IP::client_addr] equals 10.120.0.0/16] } {
  log local0. "Matched 10.120/16, incrementing Stats_GER"
  STATS::incr mystats Stats_GER 1
  }
 elseif { [IP::addr [IP::client_addr] equals 10.110.0.0/16] } {
  log local0. "Matched 10.110/16, incrementing Stats_CZ"
  STATS::incr mystats Stats_CZ 1
  }
 else {
  log local0. "Matched nothing, incrementing Stats_Other"
  STATS::incr mystats Stats_Other 1
  }
}

Finally we found solution to this very riddle.

The point was we have many partitions at our F5 (with its own route-domain). So, the correct declaration a network (IP address indeed) being checked by an iRule is as follows:

if { [IP::addr [getfield [IP::client_addr] “%” 1] equals 10.120.0.0/255.255.0.0] } { …

where the “%” 1 forces LTM to check every route-domain till exact pattern shows up, if we understood correctly.

Special thanks to this link:

Regards.