Fail to ping virtual server

I have LTM 11.3 set up. I added a vlan and a self ip successfully. Then I created a virtual server of type performance(layer 4) and set the destination the same as the self ip, all the settings are by default except that I enabled vLan and assigned the vLan I created before. The virtual server stays at Unknown status and the nodes are down. I fail ping the virtual server / self ip from other machines in the same network.

Is there anything I do wrong?

I fail ping the virtual server / self ip from other machines in the same network.

have you seen icmp when running tcpdump on bigip?

tcpdump -nni 0.0 host x.x.x.x and icmp
x.x.x.x is self ip / virtual server ip

I fail ping the virtual server / self ip from other machines in the same network.

have you seen icmp when running tcpdump on bigip?

tcpdump -nni 0.0 host x.x.x.x and icmp
x.x.x.x is self ip / virtual server ip

The result is: listening on 0.0, link-type EN10MB(Ethernet), capture size 96bytes ^C 0 packets captured 0 packets received by filter 0 packets dropped by kernel

The result is: listening on 0.0, link-type EN10MB(Ethernet), capture size 96bytes ^C 0 packets captured 0 packets received by filter 0 packets dropped by kernel

then nothing is even reaching the VS, are you connecting all devices to same switch,vlan.etc?

then nothing is even reaching the VS, are you connecting all devices to same switch,vlan.etc?