I have configured F5 to use a remote log server which is in a different subnet range. Nothing is going into it from F5. Are there some other things that have to be enabled also?
The remote log server is based on Graylog solution.
Looking at this article can someone explain the concept of Default route domain ((Domain 0) or management network)?
Does this means that my Graylog server has to be on the same network as F5
Your syslog server can be anywhere. The F5 needs to know how to get there! For syslog traffic, originating from the F5 BIG-IP you can use the MGMT port but if you want to use High Speed Logging (HSL) it would be advantageous to use a TMM port. To accomplish these things, you need to add routes. So the F5 knows where to send the traffic. Then of course you need to make sure your network has the correct permissions (firewall policies) and routes as well.