# Command Line Help

**URL:** <https://community.f5.com/t/command-line-help/18418>\
**Category:** Technical Forums\
**Tags:** asm-advanced-waf, big-ip, application-delivery\
**Created:** [March 25, 2016, 4:05pm UTC](https://community.f5.com/t/command-line-help/18418 "2016-03-25T16:05:56Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![itchmyhead\_2560](https://avatars.discourse-cdn.com/v4/letter/i/b77776/32.png) [@itchmyhead\_2560](https://community.f5.com/u/itchmyhead_2560)\
**Post date:** [March 25, 2016, 4:05pm UTC](https://community.f5.com/t/command-line-help/18418/1 "2016-03-25T16:05:56Z")

</div>

Please excuse me if this question has been answered. I am rather new with using the F5 product and would love some direction. I want to be able to do most of my work through the command line and am running into a road block. Is it possible to cut and paste config into the command line that I need? I need to be able to create a Pool, Virtual Server, and Monitor with just a cut and paste from a text file. Any direction would be much appreciated.

---

<div class="post-metadata">

**Author:** ![John\_Buchanan](https://avatars.discourse-cdn.com/v4/letter/j/45deac/32.png) [@John\_Buchanan](https://community.f5.com/u/John_Buchanan)\
**Post date:** [March 25, 2016, 4:12pm UTC](https://community.f5.com/t/command-line-help/18418/2 "2016-03-25T16:12:04Z")

</div>

What version are you running? I’d start with the TMSH reference guide, here’s the link for 11.6.0, [404 Page not found | BIG-IP Documentation](https://support.f5.com/kb/en-us/products/big-ip%5C_ltm/manuals/product/bigip-tmsh-reference-11-6-0.pdf)

---

<div class="post-metadata">

**Author:** ![eben\_240222](https://avatars.discourse-cdn.com/v4/letter/e/7ba0ec/32.png) [@eben\_240222](https://community.f5.com/u/eben_240222)\
**Post date:** [March 25, 2016, 4:24pm UTC](https://community.f5.com/t/command-line-help/18418/3 "2016-03-25T16:24:51Z")

</div>

Sure you can copy and paste configs to the CLI. you have to be in tmsh mode to do that.

---

<div class="post-metadata">

**Author:** ![itchmyhead\_2560](https://avatars.discourse-cdn.com/v4/letter/i/b77776/32.png) [@itchmyhead\_2560](https://community.f5.com/u/itchmyhead_2560)\
**Post date:** [March 31, 2016, 1:45pm UTC](https://community.f5.com/t/command-line-help/18418/4 "2016-03-31T13:45:52Z")

</div>

It appears that I am in TMSH mode. Are there any specific examples of how you write the configurations up?

---

<div class="post-metadata">

**Author:** ![Michael\_Jenkins](https://avatars.discourse-cdn.com/v4/letter/m/43a26b/32.png) [@Michael\_Jenkins](https://community.f5.com/u/Michael_Jenkins)\
**Post date:** [March 31, 2016, 4:04pm UTC](https://community.f5.com/t/command-line-help/18418/5 "2016-03-31T16:04:05Z")

</div>

You can use the

```tcl
load sys config from-terminal merge verify

```

command within

```tcl
tmsh

```

and then paste the new/updated config and then hit

```tcl
Ctrl + D

```

to execute. That command will verify the changes.

Then you can use the

```tcl
load sys config from-terminal merge

```

command and paste the config and

```tcl
Ctrl + D

```

to actually update the config.

_Note: You don’t have to do the verify before the merge, but it makes me feel safer knowing there’s not conflicts or syntax errors in the config_
